[PATCH v3 05/10] iommu/arm-smmu-v3: Introduce strtab init helper

[Shameer Kolothum]

Introduce a helper to check the sid range and to init the l2 strtab
entries(bypass). This will be useful when we have to initialize the
l2 strtab with bypass for RMR SIDs.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi at huawei.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 26 ++++++++++++---------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 8594b4a83043..29da3b681621 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2347,6 +2347,19 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
 
 static struct iommu_ops arm_smmu_ops;
 
+static int arm_smmu_init_sid_strtab(struct arm_smmu_device *smmu, u32 sid)
+{
+	/* Check the SIDs are in range of the SMMU and our stream table */
+	if (!arm_smmu_sid_in_range(smmu, sid))
+		return -ERANGE;
+
+	/* Ensure l2 strtab is initialised */
+	if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)
+		return arm_smmu_init_l2_strtab(smmu, sid);
+
+	return 0;
+}
+
 static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 {
 	int i, ret;
@@ -2375,21 +2388,12 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 	INIT_LIST_HEAD(&master->bonds);
 	dev_iommu_priv_set(dev, master);
 
-	/* Check the SIDs are in range of the SMMU and our stream table */
 	for (i = 0; i < master->num_sids; i++) {
 		u32 sid = master->sids[i];
 
-		if (!arm_smmu_sid_in_range(smmu, sid)) {
-			ret = -ERANGE;
+		ret = arm_smmu_init_sid_strtab(smmu, sid);
+		if (ret)
 			goto err_free_master;
-		}
-
-		/* Ensure l2 strtab is initialised */
-		if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB) {
-			ret = arm_smmu_init_l2_strtab(smmu, sid);
-			if (ret)
-				goto err_free_master;
-		}
 	}
 
 	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
-- 
2.17.1