[PATCH v9 03/13] media: hantro: Use syscon instead of 'ctrl' register

Benjamin Gaignard benjamin.gaignard at collabora.com
Tue Apr 20 10:10:07 BST 2021


Le 16/04/2021 à 17:14, Lucas Stach a écrit :
> Am Freitag, dem 16.04.2021 um 15:08 +0200 schrieb Benjamin Gaignard:
>> Le 16/04/2021 à 12:54, Lucas Stach a écrit :
>>> Am Mittwoch, dem 07.04.2021 um 09:35 +0200 schrieb Benjamin Gaignard:
>>>> In order to be able to share the control hardware block between
>>>> VPUs use a syscon instead a ioremap it in the driver.
>>>> To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
>>>> phandle is not found look at 'ctrl' reg-name.
>>>> With the method it becomes useless to provide a list of register
>>>> names so remove it.
>>> Sorry for putting a spoke in the wheel after many iterations of the
>>> series.
>>>
>>> We just discussed a way forward on how to handle the clocks and resets
>>> provided by the blkctl block on i.MX8MM and later and it seems there is
>>> a consensus on trying to provide virtual power domains from a blkctl
>>> driver, controlling clocks and resets for the devices in the power
>>> domain. I would like to avoid introducing yet another way of handling
>>> the blkctl and thus would like to align the i.MX8MQ VPU blkctl with
>>> what we are planning to do on the later chip generations.
>>>
>>> CC'ing Jacky Bai and Peng Fan from NXP, as they were going to give this
>>> virtual power domain thing a shot.
>> That could replace the 3 first patches and Dt patche of this series
>> but that will not impact the hevc part, so I wonder if pure hevc patches
>> could be merged anyway ?
>> They are reviewed and don't depend of how the ctrl block is managed.
> I'm not really in a position to give any informed opinion about that
> hvec patches, as I only skimmed them, but I don't see any reason to
> delay patches 04-11 from this series until the i.MX8M platform issues
> are sorted. AFAICS those things are totally orthogonal.

Hi Hans,
What do you think about this proposal to split this series ?
Get hevc part merged could allow me to continue to add features
like scaling lists, compressed reference buffers and 10-bit supports.

Regards,
Benjamin

>
> Regards,
> Lucas
>
>>> Regards,
>>> Lucas
>>>
>>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>>>> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
>>>> ---
>>>> version 9:
>>>>    - Corrections in commit message
>>>>
>>>> version 7:
>>>>    - Add Philipp reviewed-by tag.
>>>>    - Change syscon phandle name.
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> version 5:
>>>>    - use syscon instead of VPU reset driver.
>>>>    - if DT doesn't provide syscon keep backward compatibilty by using
>>>>      'ctrl' reg-name.
>>>>
>>>>    drivers/staging/media/hantro/hantro.h       |  5 +-
>>>>    drivers/staging/media/hantro/imx8m_vpu_hw.c | 52 ++++++++++++---------
>>>>    2 files changed, 34 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
>>>> index 6c1b888abe75..37b9ce04bd4e 100644
>>>> --- a/drivers/staging/media/hantro/hantro.h
>>>> +++ b/drivers/staging/media/hantro/hantro.h
>>>> @@ -13,6 +13,7 @@
>>>>    #define HANTRO_H_
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    #include <linux/platform_device.h>
>>>> +#include <linux/regmap.h>
>>>>    #include <linux/videodev2.h>
>>>>    #include <linux/wait.h>
>>>>    #include <linux/clk.h>
>>>> @@ -167,7 +168,7 @@ hantro_vdev_to_func(struct video_device *vdev)
>>>>     * @reg_bases:		Mapped addresses of VPU registers.
>>>>     * @enc_base:		Mapped address of VPU encoder register for convenience.
>>>>     * @dec_base:		Mapped address of VPU decoder register for convenience.
>>>> - * @ctrl_base:		Mapped address of VPU control block.
>>>> + * @ctrl_base:		Regmap of VPU control block.
>>>>     * @vpu_mutex:		Mutex to synchronize V4L2 calls.
>>>>     * @irqlock:		Spinlock to synchronize access to data structures
>>>>     *			shared with interrupt handlers.
>>>> @@ -186,7 +187,7 @@ struct hantro_dev {
>>>>    	void __iomem **reg_bases;
>>>>    	void __iomem *enc_base;
>>>>    	void __iomem *dec_base;
>>>> -	void __iomem *ctrl_base;
>>>> +	struct regmap *ctrl_base;
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	struct mutex vpu_mutex;	/* video_device lock */
>>>>    	spinlock_t irqlock;
>>>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> index c222de075ef4..8d0c3425234b 100644
>>>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> @@ -7,6 +7,7 @@
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    #include <linux/clk.h>
>>>>    #include <linux/delay.h>
>>>> +#include <linux/mfd/syscon.h>
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    #include "hantro.h"
>>>>    #include "hantro_jpeg.h"
>>>> @@ -24,30 +25,28 @@
>>>>    #define CTRL_G1_PP_FUSE		0x0c
>>>>    #define CTRL_G2_DEC_FUSE	0x10
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> +static const struct regmap_config ctrl_regmap_ctrl = {
>>>> +	.reg_bits = 32,
>>>> +	.val_bits = 32,
>>>> +	.reg_stride = 0x14,
>>>> +};
>>>> +
>>>>    static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
>>>>    {
>>>> -	u32 val;
>>>> -
>>>>    	/* Assert */
>>>> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> -	val &= ~reset_bits;
>>>> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> +	regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET, reset_bits, 0);
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	udelay(2);
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	/* Release */
>>>> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> -	val |= reset_bits;
>>>> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> +	regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET,
>>>> +			   reset_bits, reset_bits);
>>>>    }
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
>>>>    {
>>>> -	u32 val;
>>>> -
>>>> -	val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>>>> -	val |= clock_bits;
>>>> -	writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>>>> +	regmap_update_bits(vpu->ctrl_base, CTRL_CLOCK_ENABLE,
>>>> +			   clock_bits, clock_bits);
>>>>    }
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>>>> @@ -64,9 +63,9 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>>>>    	imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	/* Set values of the fuse registers */
>>>> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
>>>> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
>>>> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
>>>> +	regmap_write(vpu->ctrl_base, CTRL_G1_DEC_FUSE, 0xffffffff);
>>>> +	regmap_write(vpu->ctrl_base, CTRL_G1_PP_FUSE, 0xffffffff);
>>>> +	regmap_write(vpu->ctrl_base, CTRL_G2_DEC_FUSE, 0xffffffff);
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> @@ -150,8 +149,22 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>>>>    {
>>>> -	vpu->dec_base = vpu->reg_bases[0];
>>>> -	vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
>>>> +	struct device_node *np = vpu->dev->of_node;
>>>> +
>>>> +	vpu->ctrl_base = syscon_regmap_lookup_by_phandle(np, "nxp,imx8m-vpu-ctrl");
>>>> +	if (IS_ERR(vpu->ctrl_base)) {
>>>> +		struct resource *res;
>>>> +		void __iomem *ctrl;
>>>> +
>>>> +		res = platform_get_resource_byname(vpu->pdev, IORESOURCE_MEM, "ctrl");
>>>> +		ctrl = devm_ioremap_resource(vpu->dev, res);
>>>> +		if (IS_ERR(ctrl))
>>>> +			return PTR_ERR(ctrl);
>>>> +
>>>> +		vpu->ctrl_base = devm_regmap_init_mmio(vpu->dev, ctrl, &ctrl_regmap_ctrl);
>>>> +		if (IS_ERR(vpu->ctrl_base))
>>>> +			return PTR_ERR(vpu->ctrl_base);
>>>> +	}
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    	return 0;
>>>>    }
>>>> @@ -198,7 +211,6 @@ static const struct hantro_irq imx8mq_irqs[] = {
>>>>    };
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>>>> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>>>>    
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>    const struct hantro_variant imx8mq_vpu_variant = {
>>>>    	.dec_fmts = imx8m_vpu_dec_fmts,
>>>> @@ -215,6 +227,4 @@ const struct hantro_variant imx8mq_vpu_variant = {
>>>>    	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
>>>>    	.clk_names = imx8mq_clk_names,
>>>>    	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
>>>> -	.reg_names = imx8mq_reg_names,
>>>> -	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
>>>>    };
>>>
>
>



More information about the linux-arm-kernel mailing list