[PATCH RESEND 3/4] docs: Add HiSilicon PTT device driver documentation

Daniel Thompson daniel.thompson at linaro.org
Mon Apr 19 10:07:50 BST 2021


On Sat, Apr 17, 2021 at 06:17:10PM +0800, Yicong Yang wrote:
> Document the introduction and usage of HiSilicon PTT device driver.
> 
> Signed-off-by: Yicong Yang <yangyicong at hisilicon.com>
> ---
>  Documentation/trace/hisi-ptt.rst | 326 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 326 insertions(+)
>  create mode 100644 Documentation/trace/hisi-ptt.rst
> 
> diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst
> new file mode 100644
> index 0000000..f093846
> --- /dev/null
> +++ b/Documentation/trace/hisi-ptt.rst
> @@ -0,0 +1,326 @@
> [...]
> +On Kunpeng 930 SoC, the PCIe Root Complex is composed of several
> +PCIe cores. Each PCIe core includes several Root Ports and a PTT
> +RCiEP, like below. The PTT device is capable of tuning and
> +tracing the link of the PCIe core.
> +::
> +          +--------------Core 0-------+
> +          |       |       [   PTT   ] |
> +          |       |       [Root Port]---[Endpoint]
> +          |       |       [Root Port]---[Endpoint]
> +          |       |       [Root Port]---[Endpoint]
> +    Root Complex  |------Core 1-------+
> +          |       |       [   PTT   ] |
> +          |       |       [Root Port]---[ Switch ]---[Endpoint]
> +          |       |       [Root Port]---[Endpoint] `-[Endpoint]
> +          |       |       [Root Port]---[Endpoint]
> +          +---------------------------+
> +
> +The PTT device driver cannot be loaded if debugfs is not mounted.

This can't be right can it? Obviously debugfs must be enabled but why
mounted?


> +Each PTT device will be presented under /sys/kernel/debugfs/hisi_ptt
> +as its root directory, with name of its BDF number.
> +::
> +
> +    /sys/kernel/debug/hisi_ptt/<domain>:<bus>:<device>.<function>
> +
> +Tune
> +====
> +
> +PTT tune is designed for monitoring and adjusting PCIe link parameters (events).
> +Currently we support events in 4 classes. The scope of the events
> +covers the PCIe core to which the PTT device belongs.
> +
> +Each event is presented as a file under $(PTT root dir)/$(BDF)/tune, and
> +mostly a simple open/read/write/close cycle will be used to tune
> +the event.
> +::
> +    $ cd /sys/kernel/debug/hisi_ptt/$(BDF)/tune
> +    $ ls
> +    qos_tx_cpl    qos_tx_np    qos_tx_p
> +    tx_path_rx_req_alloc_buf_level
> +    tx_path_tx_req_alloc_buf_level
> +    $ cat qos_tx_dp
> +    1
> +    $ echo 2 > qos_tx_dp
> +    $ cat qos_tx_dp
> +    2
> +
> +Current value (numerical value) of the event can be simply read
> +from the file, and the desired value written to the file to tune.

I saw that this RFC asks about whether debugfs is an appropriate
interface for the *tracing* capability of the platform. Have similar
questions been raised about the tuning interfaces?

It looks to me like tuning could be handled entirely using sysfs
attributes. I think trying to handle these mostly decoupled feature
in the same place is likely to be a mistake.


Daniel.



More information about the linux-arm-kernel mailing list