[PATCH] [v4, 1/1] clocksource/drivers/timer-mediatek: optimize systimer irq clear flow on shutdown
Daniel Lezcano
daniel.lezcano at linaro.org
Mon Apr 19 09:44:34 BST 2021
On 09/04/2021 11:22, Fengquan Chen wrote:
> mtk_syst_clkevt_shutdown is called after irq disabled in suspend flow,
> clear any pending systimer irq when shutdown to avoid suspend aborted
> due to timer irq pending
>
> Also as for systimer in mediatek socs, there must be firstly enable
> timer before clear systimer irq
>
> Fixes: e3af677607d9("clocksource/drivers/timer-mediatek: Add support for system timer")
> Signed-off-by: Fengquan Chen <fengquan.chen at mediatek.com>
>
> ---
> drivers/clocksource/timer-mediatek.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
> index 9318edc..6461fd3 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -60,9 +60,9 @@
> * SYST_CON_EN: Clock enable. Shall be set to
> * - Start timer countdown.
> * - Allow timeout ticks being updated.
> - * - Allow changing interrupt functions.
> + * - Allow changing interrupt status,like clear irq pending.
> *
> - * SYST_CON_IRQ_EN: Set to allow interrupt.
> + * SYST_CON_IRQ_EN: Set to enable interrupt.
> *
> * SYST_CON_IRQ_CLR: Set to clear interrupt.
> */
> @@ -75,6 +75,7 @@
> static void mtk_syst_ack_irq(struct timer_of *to)
> {
> /* Clear and disable interrupt */
> + writel(SYST_CON_EN, SYST_CON_REG(to));
> writel(SYST_CON_IRQ_CLR | SYST_CON_EN, SYST_CON_REG(to));
> }
IIRC, there is a hardware issue here. If it is the case, please describe
it and refer to an errata if any.
Also Evan Benn commented your code and asked a couple of questions [1],
please answer before reposting a new version.
Comments ignored == patch ignored
> @@ -111,6 +112,9 @@ static int mtk_syst_clkevt_next_event(unsigned long ticks,
>
> static int mtk_syst_clkevt_shutdown(struct clock_event_device *clkevt)
> {
> + /* Clear any irq */
> + mtk_syst_ack_irq(to_timer_of(clkevt));
> +
> /* Disable timer */
> writel(0, SYST_CON_REG(to_timer_of(clkevt)));
Please check out the patch sent by Evan Benn [2], if you agree, ack it.
Thanks
-- Daniel
[1] https://patchwork.kernel.org/comment/24059277/
[2]
https://lore.kernel.org/linux-arm-kernel/20210412132200.v3.1.I1d9917047de06715da16e1620759f703fcfdcbcb@changeid/
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
More information about the linux-arm-kernel
mailing list