[PATCH net-next 2/5] dt-bindings: net: fsl: enetc: add the IERB documentation

[Vladimir Oltean]

From: Vladimir Oltean <vladimir.oltean at nxp.com>

Mention the required compatible string and base address for the
Integrated Endpoint Register Block node.

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
 .../devicetree/bindings/net/fsl-enetc.txt         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index b7034ccbc1bd..9b9a3f197e2d 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -102,3 +102,18 @@ Example:
 			full-duplex;
 		};
 	};
+
+* Integrated Endpoint Register Block bindings
+
+Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
+Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
+with the following properties:
+
+- reg		: Specifies the address in the SoC memory space.
+- compatible	: Must be "fsl,ls1028a-enetc-ierb".
+
+Example:
+	ierb at 1f0800000 {
+		compatible = "fsl,ls1028a-enetc-ierb";
+		reg = <0x01 0xf0800000 0x0 0x10000>;
+	};
-- 
2.25.1