[PATCH] Revert "ASoC: mt6359: add ASoC mt6359 ASoC accdet jack document"
Rob Herring
robh at kernel.org
Fri Apr 16 19:01:18 BST 2021
This reverts commit e61c589587c772c5f672b22683c3e0b38be20702.
The binding document has lots of schema errors and there's been no
effort to fix them, so let's remove it.
Cc: Argus Lin <argus.lin at mediatek.com>
Cc: Mark Brown <broonie at kernel.org>
Cc: Liam Girdwood <lgirdwood at gmail.com>
Cc: Matthias Brugger <matthias.bgg at gmail.com>
Cc: alsa-devel at alsa-project.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-mediatek at lists.infradead.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
.../bindings/sound/mt6359-accdet.yaml | 164 ------------------
1 file changed, 164 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
diff --git a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml b/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
deleted file mode 100644
index 7fb3e8dfb4c5..000000000000
--- a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
+++ /dev/null
@@ -1,164 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mt6359-accdet.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek Technologies Inc. MT6359 ASoC accdet jack driver bindings
-
-maintainers:
- - Chipeng Chang <chipeng.chang at mediatek.com>
-
-description: |
- This binding describes the Mediatek Technologies MT6359 ASoC
- accdet jack driver.
-
-properties:
- mediatek,accdet-name:
- maxItems: 1
- description: named as "mt6359-accdet" jack.
-
- mediatek,mic-vol:
- maxItems: 1
- description: |
- accdet micbias1 voltage.
-
- enum:
- - 0x00 # 1.7v - micbias1 volage is 1.7v.
- - 0x01 # 1.8v - micbias1 volage is 1.8v.
- - 0x02 # 1.9v - micbias1 volage is 1.9v.
- - 0x03 # 2.0v - micbias1 volage is 2.0v.
- - 0x04 # 2.1v - micbias1 volage is 2.1v.
- - 0x05 # 2.5v - micbias1 volage is 2.5v.
- - 0x06 # 2.6v - micbias1 volage is 2.6v.
- - 0x07 # 2.7v - micbias1 volage is 2.7v.
- - 0x08 # 2.8v - micbias1 volage is 2.8v.
- - 0x09 # 2.85v - micbias1 volage is 2.85v.
-
- mediatek,mic-mode:
- maxItems: 1
- description: |
- value as 1, 2, 6 to indicate ACC/DCC mode. default is DCC mode 2.
-
- enum:
- - 0x01 # ACC - ACC mode.
- - 0x02 # DCC - low cost without in bias.
- - 0x06 # DCC - low cost with in bias.
-
- mediatek,pwm-deb-setting:
- maxItems: 15
- description: |
- headset-mode-setting : Indicates customized pwm, debounce setting
- accdet pwm_width, pwm_thresh, fall_delay, rise_delay
- debounce0, debounce1, debounce3, debounce4
- eint pwm_width, eint pwm_thresh
- eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce.
-
- mediatek,eint-use-ap:
- maxItems: 1
- description: |
- indicates to use ap gpio.
-
- enum:
- - 0x00 # MT6359 eint detection mode.
- - 0x01 # SoC GPIO detection mode.
-
- mediatek,eint-detect-mode:
- maxItems: 1
- description: |
- indicates to use ap gpio.
-
- enum:
- - 0x00 # detection mode with higher detection power.
- - 0x01 # detection mode with lower detection power.
- - 0x02 # detection mode with sw moisture detection mode.
- - 0x03 # detection mode with hw moisture detection mode1.
- - 0x04 # detection mode with hw moisture detection mode2.
-
- mediatek,eint-num:
- maxItems: 1
- description: |
- incicates pmic eint usage.
-
- enum:
- - 0x0 # PMIC_EINT0 - use pmic eint0 to trigger plug interrupt.
- - 0x1 # PMIC_EINT1 - use pmic eint1 to trigger plug interrupt.
- - 0x2 # PMIC_BI_EINT - use pmic eint0/1 to trigger plug interrupt.
-
- mediatek,eint-trig-mode:
- maxItems: 1
- description: |
- incicates pmic eint trigger mode.
-
- enum:
- - 0x0 # PMIC_GPIO - use pmic gpio to detect plug status.
- - 0x1 # PMIC_INVERTER - use pmic inverter to detect plug status.
-
- mediatek,eint-use-ext-res:
- maxItems: 1
- description: |
- select HP_EINT pull up resistance, default 0 use internal resistance.
-
- enum:
- - 0x0 # use internal resistor.
- - 0x1 # use external resistor.
-
- mediatek,eint-comp-vth:
- maxItems: 1
- description: |
- indicates comparator detection voltage.
-
- enum:
- - 0x00 # 2.8v.
- - 0x01 # 2.4v.
- - 0x02 # 2.0v.
- - 0x03 # 0.7v.
-
- mediatek,key-mode:
- maxItems: 1
- description: |
- incicates key mode type.
-
- enum:
- - 0x0 # THREE_KEY - support 3-key key mode.
- - 0x1 # FOUR_KEY - support 4-key key mode.
- - 0x2 # TRI_KEY_CDD - support 3-key google CDD key mode.
-
- mediatek,three-key-thr:
- maxItems: 4
- description: |
- 3 key device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
-
- mediatek,tri-key-cdd-thr:
- maxItems: 4
- description: |
- 3 key CDD device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
-
- mediatek,four-key-thr:
- maxItems: 4
- description: |
- 4 key device detection threshold: 0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX.
-
-additionalProperties: false
-
-examples:
- - |
- accdet: accdet {
- mediatek,accdet-name = "mt6359-accdet";
- mediatek,mic-vol = <8>;
- mediatek,mic-mode = <2>;
- mediatek,pwm-deb-setting = <0x500 0x500 1 0x1f0
- 0x800 0x800 0x20 0x44
- 0x4 0x1
- 0x5 0x3 0x3 0x5 0xe>;
- mediatek,eint-use-ap = <0>;
- mediatek,eint-detect-mode = <4>;
- mediatek,eint-num = <0>;
- mediatek,eint-trig-mode = <1>;
- mediatek,eint-use-ext-res = <0>;
- mediatek,eint-comp-vth = <2>;
- mediatek,key-mode = <0>;
- mediatek,three-key-thr = <0 80 220 400>;
- status = "okay";
- };
-...
--
2.27.0
More information about the linux-arm-kernel
mailing list