[PATCH v9 03/13] media: hantro: Use syscon instead of 'ctrl' register
Benjamin Gaignard
benjamin.gaignard at collabora.com
Fri Apr 16 14:08:45 BST 2021
Le 16/04/2021 à 12:54, Lucas Stach a écrit :
> Am Mittwoch, dem 07.04.2021 um 09:35 +0200 schrieb Benjamin Gaignard:
>> In order to be able to share the control hardware block between
>> VPUs use a syscon instead a ioremap it in the driver.
>> To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
>> phandle is not found look at 'ctrl' reg-name.
>> With the method it becomes useless to provide a list of register
>> names so remove it.
> Sorry for putting a spoke in the wheel after many iterations of the
> series.
>
> We just discussed a way forward on how to handle the clocks and resets
> provided by the blkctl block on i.MX8MM and later and it seems there is
> a consensus on trying to provide virtual power domains from a blkctl
> driver, controlling clocks and resets for the devices in the power
> domain. I would like to avoid introducing yet another way of handling
> the blkctl and thus would like to align the i.MX8MQ VPU blkctl with
> what we are planning to do on the later chip generations.
>
> CC'ing Jacky Bai and Peng Fan from NXP, as they were going to give this
> virtual power domain thing a shot.
That could replace the 3 first patches and Dt patche of this series
but that will not impact the hevc part, so I wonder if pure hevc patches
could be merged anyway ?
They are reviewed and don't depend of how the ctrl block is managed.
Regards,
Benjamin
>
> Regards,
> Lucas
>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
>> ---
>> version 9:
>> - Corrections in commit message
>>
>> version 7:
>> - Add Philipp reviewed-by tag.
>> - Change syscon phandle name.
>>
>>
>>
>>
>> version 5:
>> - use syscon instead of VPU reset driver.
>> - if DT doesn't provide syscon keep backward compatibilty by using
>> 'ctrl' reg-name.
>>
>> drivers/staging/media/hantro/hantro.h | 5 +-
>> drivers/staging/media/hantro/imx8m_vpu_hw.c | 52 ++++++++++++---------
>> 2 files changed, 34 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
>> index 6c1b888abe75..37b9ce04bd4e 100644
>> --- a/drivers/staging/media/hantro/hantro.h
>> +++ b/drivers/staging/media/hantro/hantro.h
>> @@ -13,6 +13,7 @@
>> #define HANTRO_H_
>>
>>
>>
>>
>> #include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> #include <linux/videodev2.h>
>> #include <linux/wait.h>
>> #include <linux/clk.h>
>> @@ -167,7 +168,7 @@ hantro_vdev_to_func(struct video_device *vdev)
>> * @reg_bases: Mapped addresses of VPU registers.
>> * @enc_base: Mapped address of VPU encoder register for convenience.
>> * @dec_base: Mapped address of VPU decoder register for convenience.
>> - * @ctrl_base: Mapped address of VPU control block.
>> + * @ctrl_base: Regmap of VPU control block.
>> * @vpu_mutex: Mutex to synchronize V4L2 calls.
>> * @irqlock: Spinlock to synchronize access to data structures
>> * shared with interrupt handlers.
>> @@ -186,7 +187,7 @@ struct hantro_dev {
>> void __iomem **reg_bases;
>> void __iomem *enc_base;
>> void __iomem *dec_base;
>> - void __iomem *ctrl_base;
>> + struct regmap *ctrl_base;
>>
>>
>>
>>
>> struct mutex vpu_mutex; /* video_device lock */
>> spinlock_t irqlock;
>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> index c222de075ef4..8d0c3425234b 100644
>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> @@ -7,6 +7,7 @@
>>
>>
>>
>>
>> #include <linux/clk.h>
>> #include <linux/delay.h>
>> +#include <linux/mfd/syscon.h>
>>
>>
>>
>>
>> #include "hantro.h"
>> #include "hantro_jpeg.h"
>> @@ -24,30 +25,28 @@
>> #define CTRL_G1_PP_FUSE 0x0c
>> #define CTRL_G2_DEC_FUSE 0x10
>>
>>
>>
>>
>> +static const struct regmap_config ctrl_regmap_ctrl = {
>> + .reg_bits = 32,
>> + .val_bits = 32,
>> + .reg_stride = 0x14,
>> +};
>> +
>> static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
>> {
>> - u32 val;
>> -
>> /* Assert */
>> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>> - val &= ~reset_bits;
>> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>> + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET, reset_bits, 0);
>>
>>
>>
>>
>> udelay(2);
>>
>>
>>
>>
>> /* Release */
>> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>> - val |= reset_bits;
>> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>> + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET,
>> + reset_bits, reset_bits);
>> }
>>
>>
>>
>>
>> static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
>> {
>> - u32 val;
>> -
>> - val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>> - val |= clock_bits;
>> - writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>> + regmap_update_bits(vpu->ctrl_base, CTRL_CLOCK_ENABLE,
>> + clock_bits, clock_bits);
>> }
>>
>>
>>
>>
>> static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>> @@ -64,9 +63,9 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>> imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
>>
>>
>>
>>
>> /* Set values of the fuse registers */
>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
>> + regmap_write(vpu->ctrl_base, CTRL_G1_DEC_FUSE, 0xffffffff);
>> + regmap_write(vpu->ctrl_base, CTRL_G1_PP_FUSE, 0xffffffff);
>> + regmap_write(vpu->ctrl_base, CTRL_G2_DEC_FUSE, 0xffffffff);
>>
>>
>>
>>
>> clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
>>
>>
>>
>>
>> @@ -150,8 +149,22 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>>
>>
>>
>>
>> static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>> {
>> - vpu->dec_base = vpu->reg_bases[0];
>> - vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
>> + struct device_node *np = vpu->dev->of_node;
>> +
>> + vpu->ctrl_base = syscon_regmap_lookup_by_phandle(np, "nxp,imx8m-vpu-ctrl");
>> + if (IS_ERR(vpu->ctrl_base)) {
>> + struct resource *res;
>> + void __iomem *ctrl;
>> +
>> + res = platform_get_resource_byname(vpu->pdev, IORESOURCE_MEM, "ctrl");
>> + ctrl = devm_ioremap_resource(vpu->dev, res);
>> + if (IS_ERR(ctrl))
>> + return PTR_ERR(ctrl);
>> +
>> + vpu->ctrl_base = devm_regmap_init_mmio(vpu->dev, ctrl, &ctrl_regmap_ctrl);
>> + if (IS_ERR(vpu->ctrl_base))
>> + return PTR_ERR(vpu->ctrl_base);
>> + }
>>
>>
>>
>>
>> return 0;
>> }
>> @@ -198,7 +211,6 @@ static const struct hantro_irq imx8mq_irqs[] = {
>> };
>>
>>
>>
>>
>> static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>>
>>
>>
>>
>> const struct hantro_variant imx8mq_vpu_variant = {
>> .dec_fmts = imx8m_vpu_dec_fmts,
>> @@ -215,6 +227,4 @@ const struct hantro_variant imx8mq_vpu_variant = {
>> .num_irqs = ARRAY_SIZE(imx8mq_irqs),
>> .clk_names = imx8mq_clk_names,
>> .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
>> - .reg_names = imx8mq_reg_names,
>> - .num_regs = ARRAY_SIZE(imx8mq_reg_names)
>> };
>
>
More information about the linux-arm-kernel
mailing list