[PATCH V2] dt-bindings: mailbox: ti, secure-proxy: Convert to yaml

[Rob Herring]

On Tue, Apr 13, 2021 at 05:45:35PM -0500, Nishanth Menon wrote:
> Convert the ti,secure-proxy to yaml for better checks and documentation.
> Differences being mostly in the examples:
> - I've dropped the example usage of mailbox client, it is better done in
>   tisci node definition
> - Switched reg usage for address-cells and size-cells 1 - aligned with
>   schema checks as well
> - included header in example for buildable example
> 
> While at this, lets make sure to support upto 100 rx threads even though
> typically upto 1 threads is practically in use.
> 
> NOTE: The following checkpatch warning is generated since we do include the header
> in the example, but this is a false positive warning.
>   WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
> Changes since V1: (Thanks Suman for some offline comments)
> - Strengthened interrupt-names property to be on rails
> - More documentation (we dont want an information loss between txt and
>   yaml)
> - Added a max interrupts of 100, which is a rather conservative limit on
>   current devices, but who knows..
> - Commit message updates
> - compatible is a simpler const.
> - interrupt-names are required property - makes no sense in not knowing
>   which interrupts belong to which thread irqs.
> 
> V1: https://lore.kernel.org/linux-arm-kernel/20210413171230.5872-1-nm@ti.com/
> 
>  .../bindings/mailbox/ti,secure-proxy.txt      | 50 ------------
>  .../bindings/mailbox/ti,secure-proxy.yaml     | 79 +++++++++++++++++++
>  2 files changed, 79 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt
>  create mode 100644 Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt
> deleted file mode 100644
> index 6c9c7daf0f5c..000000000000
> --- a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -Texas Instruments' Secure Proxy
> -========================================
> -
> -The Texas Instruments' secure proxy is a mailbox controller that has
> -configurable queues selectable at SoC(System on Chip) integration. The
> -Message manager is broken up into different address regions that are
> -called "threads" or "proxies" - each instance is unidirectional and is
> -instantiated at SoC integration level by system controller to indicate
> -receive or transmit path.
> -
> -Message Manager Device Node:
> -===========================
> -Required properties:
> ---------------------
> -- compatible:		Shall be "ti,am654-secure-proxy"
> -- reg-names 		target_data - Map the proxy data region
> -			rt - Map the realtime status region
> -			scfg - Map the configuration region
> -- reg:			Contains the register map per reg-names.
> -- #mbox-cells		Shall be 1 and shall refer to the transfer path
> -			called thread.
> -- interrupt-names:	Contains interrupt names matching the rx transfer path
> -			for a given SoC. Receive interrupts shall be of the
> -			format: "rx_<PID>".
> -- interrupts:		Contains the interrupt information corresponding to
> -			interrupt-names property.
> -
> -Example(AM654):
> -------------
> -
> -	secure_proxy: mailbox at 32c00000 {
> -		compatible = "ti,am654-secure-proxy";
> -		#mbox-cells = <1>;
> -		reg-names = "target_data", "rt", "scfg";
> -		reg = <0x0 0x32c00000 0x0 0x100000>,
> -		      <0x0 0x32400000 0x0 0x100000>,
> -		      <0x0 0x32800000 0x0 0x100000>;
> -		interrupt-names = "rx_011";
> -		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> -	};
> -
> -	dmsc: dmsc {
> -		[...]
> -		mbox-names = "rx", "tx";
> -		# RX Thread ID is 11
> -		# TX Thread ID is 13
> -		mboxes= <&secure_proxy 11>,
> -			<&secure_proxy 13>;
> -		[...]
> -	};
> diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
> new file mode 100644
> index 000000000000..08a4837fdfcc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments' Secure Proxy
> +
> +maintainers:
> +  - Nishanth Menon <nm at ti.com>
> +
> +description: |
> +  The Texas Instruments' secure proxy is a mailbox controller that has
> +  configurable queues selectable at SoC(System on Chip) integration. The
> +  Message manager is broken up into different address regions that are
> +  called "threads" or "proxies" - each instance is unidirectional and is
> +  instantiated at SoC integration level by system controller to indicate
> +  receive or transmit path.
> +
> +properties:
> +  $nodename:
> +    pattern: "^mailbox@[0-9a-f]+$"
> +
> +  compatible:
> +    const: ti,am654-secure-proxy
> +
> +  "#mbox-cells":
> +    const: 1
> +    description:
> +      Contains the secure proxy thread ID used for the specific transfer path.
> +
> +  reg-names:
> +    items:
> +      - const: target_data
> +      - const: rt
> +      - const: scfg
> +
> +  reg:
> +    minItems: 3
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 100
> +    items:
> +      - pattern: "^rx_[0-9]{3}$"

Need to drop the '-' to make this apply to all entries. Otherwise, it's 
just the first one.

> +    description:
> +      Contains the interrupt name information for the Rx interrupt path for
> +      secure proxy thread in the form 'rx_<PID>'.
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 100
> +    description:
> +      Contains the interrupt information for the Rx interrupt path for secure
> +      proxy.
> +
> +required:
> +  - compatible
> +  - reg-names
> +  - reg
> +  - interrupt-names
> +  - interrupts
> +  - "#mbox-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    secure_proxy: mailbox at 32c00000 {
> +          compatible = "ti,am654-secure-proxy";
> +          #mbox-cells = <1>;
> +          reg-names = "target_data", "rt", "scfg";
> +          reg = <0x32c00000 0x100000>,
> +                <0x32400000 0x100000>,
> +                <0x32800000 0x100000>;
> +          interrupt-names = "rx_011";
> +          interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> -- 
> 2.31.0
>