[PATCH 1/1] mm: Fix struct page layout on 32-bit systems

[David Laight]

From: Matthew Wilcox <willy at infradead.org>
> Sent: 15 April 2021 19:22
> 
> On Thu, Apr 15, 2021 at 08:08:32PM +0200, Jesper Dangaard Brouer wrote:
> > +static inline
> > +dma_addr_t page_pool_dma_addr_read(dma_addr_t dma_addr)
> > +{
> > +	/* Workaround for storing 64-bit DMA-addr on 32-bit machines in struct
> > +	 * page.  The page->dma_addr share area with page->compound_head which
> > +	 * use bit zero to mark compound pages. This is okay, as DMA-addr are
> > +	 * aligned pointers which have bit zero cleared.
> > +	 *
> > +	 * In the 32-bit case, page->compound_head is 32-bit.  Thus, when
> > +	 * dma_addr_t is 64-bit it will be located in top 32-bit.  Solve by
> > +	 * swapping dma_addr 32-bit segments.
> > +	 */
> > +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
> 
> #if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) && defined(__BIG_ENDIAN)
> otherwise you'll create the problem on ARM that you're avoiding on PPC ...
> 
> I think you want to delete the word '_read' from this function name because
> you're using it for both read and write.

I think I'd use explicit dma_addr_hi and dma_addr_lo and
separate read/write functions just to make absolutely sure
nothing picks up the swapped value.

Isn't it possible to move the field down one long?
This might require an explicit zero - but this is not a common
code path - the extra write will be noise.

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)