[PATCH v4 30/33] dt-bindings: media: add microchip,xisc device bindings

[Rob Herring]

On Thu, Apr 15, 2021 at 11:58:46AM +0300, Eugen Hristev wrote:
> Add bindings for the Microchip eXtended Image Sensor Controller.
> Based on the atmel,isc.yaml binding.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
> ---
>  .../bindings/media/microchip,xisc.yaml        | 129 ++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/microchip,xisc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
> new file mode 100644
> index 000000000000..c829fa3d2e0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: GPL-2.0-only

Dual license still missing.

> +# Copyright (C) 2021 Microchip Technology, Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip eXtended Image Sensor Controller (XISC)
> +
> +maintainers:
> +  - Eugen Hristev <eugen.hristev at microchip.com>
> +
> +description: |
> +  The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
> +  Microchip AT91 SAM family of devices.
> +
> +  The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
> +  The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
> +  parallel sensor.
> +
> +  The XISC provides one clock output that is used to clock the demuxer/bridge.
> +
> +properties:
> +  compatible:
> +    const: microchip,sama7g5-isc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: hclock
> +
> +  '#clock-cells':
> +    const: 0
> +
> +  clock-output-names:
> +    const: isc-mck
> +
> +  microchip,mipi-mode:
> +    type: boolean
> +    description:
> +      As the XISC is usually connected to a demux/bridge, the XISC receives
> +      the same type of input, however, it should be aware of the type of
> +      signals received. The mipi-mode enables different internal handling
> +      of the data and clock lines.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      Input port node, single endpoint describing the input pad.
> +
> +    properties:
> +      endpoint:
> +        $ref: video-interfaces.yaml#
> +
> +        properties:
> +          bus-type:
> +            enum: [5, 6]
> +
> +          remote-endpoint: true
> +
> +          bus-width:
> +            enum: [8, 9, 10, 11, 12]
> +            default: 12
> +
> +          hsync-active:
> +            enum: [0, 1]
> +            default: 1
> +
> +          vsync-active:
> +            enum: [0, 1]
> +            default: 1
> +
> +          pclk-sample:
> +            enum: [0, 1]
> +            default: 1
> +
> +        required:
> +          - remote-endpoint
> +          - bus-type
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +  - clock-output-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/at91.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    xisc: xisc at e1408000 {
> +        compatible = "microchip,sama7g5-isc";
> +        reg = <0xe1408000 0x2000>;
> +        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
> +        clock-names = "hclock";
> +        #clock-cells = <0>;
> +        clock-output-names = "isc-mck";
> +
> +        port {
> +                xisc_in: endpoint {
> +                       bus-type = <5>; /* Parallel */
> +                       remote-endpoint = <&csi2dc_out>;
> +                       hsync-active = <1>;
> +                       vsync-active = <1>;
> +                       bus-width = <12>;
> +                };
> +        };
> +    };
> +
> -- 
> 2.25.1
>