[PATCH v2 2/7] net: phy: micrel: KSZ8081 & KSZ9031: add loopback support

[Oleksij Rempel]

PHY loopback is needed for the ethernet controller self test support.
This PHY was tested with the generic net sefltest in combination with
FEC ethernet controller and SJA1105 switch.

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 drivers/net/phy/micrel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..26066b1e02e5 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1311,6 +1311,7 @@ static struct phy_driver ksphy_driver[] = {
 	.get_stats	= kszphy_get_stats,
 	.suspend	= kszphy_suspend,
 	.resume		= kszphy_resume,
+	.set_loopback	= genphy_loopback,
 }, {
 	.phy_id		= PHY_ID_KSZ8061,
 	.name		= "Micrel KSZ8061",
@@ -1356,6 +1357,7 @@ static struct phy_driver ksphy_driver[] = {
 	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= kszphy_resume,
+	.set_loopback	= genphy_loopback,
 }, {
 	.phy_id		= PHY_ID_LAN8814,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
-- 
2.29.2