[PATCH v1 0/3] arm: imx: Add i.mx6q DaSheng COM-9XX SBC board support

[dillon.minfei at gmail.com]

From: dillon min <dillon.minfei at gmail.com>

This patchset aims to add kernel support on DaSheng COM-8XX SBC board
optimize ov2659 driver to handle xvclk on/off at proper stage to save power

changes based on master branch, since commit id:
89698becf06d341a700913c3d89ce2a914af69a2

The DaSheng Com-9xx is and ARM based signle board computer (SBC)
featuring:
- i.MX6Q
- 2GiB LPDDR3 DRAM
- 8GiB eMMC 5.0 FLASH
- 4MiB SPI Flash
- USB 2.0 Host/Device
- Multiple multi-protocol RS232/RS485 Serial ports
- microSD socket
- 5V DC power input
- HDMI1.4a,1080p at 60
- RGMIIx1 Gigabit Ethernet
- CSI0x1, connect with ov2659

dillon min (3):
  dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC board dts
    support
  arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support
  media: i2c: ov2659: Add clk_prepare_enable(), clk_disable_unprepare()
    to handle xvclk

 Documentation/devicetree/bindings/arm/fsl.yaml |   1 +
 arch/arm/boot/dts/Makefile                     |   1 +
 arch/arm/boot/dts/imx6q-ds.dts                 |  18 +
 arch/arm/boot/dts/imx6qdl-ds.dtsi              | 465 +++++++++++++++++++++++++
 drivers/media/i2c/ov2659.c                     |  24 +-
 5 files changed, 503 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6q-ds.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-ds.dtsi

-- 
2.7.4