[PATCH v1 1/7] soc: imx: gpcv2: check for errors when r/w registers
Andrey Smirnov
andrew.smirnov at gmail.com
Mon Apr 12 18:16:27 BST 2021
On Wed, Apr 7, 2021 at 2:21 PM Adrien Grassein
<adrien.grassein at gmail.com> wrote:
>
> Errors were not checked after each access to registers
FWIW, I didn't write any error checking code on purpose since all of
those are memory mapped registers and I don't think there's a case for
those to error out. Don't have a strong opinion on this though.
> and clocks initialisation.
>
> Signed-off-by: Adrien Grassein <adrien.grassein at gmail.com>
> ---
> drivers/soc/imx/gpcv2.c | 62 ++++++++++++++++++++++++++++++-----------
> 1 file changed, 45 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index db7e7fc321b1..8ec5b1b817c7 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -140,8 +140,12 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> int i, ret = 0;
> u32 pxx_req;
>
> - regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
> - domain->bits.map, domain->bits.map);
> + ret = regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
> + domain->bits.map, domain->bits.map);
> + if (ret) {
> + dev_err(domain->dev, "failed to map GPC PGC domain\n");
> + return ret;
> + }
>
> if (has_regulator && on) {
> ret = regulator_enable(domain->regulator);
> @@ -152,19 +156,39 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> }
>
> /* Enable reset clocks for all devices in the domain */
> - for (i = 0; i < domain->num_clks; i++)
> - clk_prepare_enable(domain->clk[i]);
> + for (i = 0; i < domain->num_clks; i++) {
> + ret = clk_prepare_enable(domain->clk[i]);
> + if (ret) {
> + dev_err(domain->dev, "failed to enable clocks\n");
> + goto disable_clocks;
> + }
> + }
>
> - if (enable_power_control)
> - regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> - GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
> + if (enable_power_control) {
> + ret = regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> + GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
> + if (ret) {
> + dev_err(domain->dev, "failed to enable power control\n");
> + goto disable_clocks;
> + }
> + }
>
> - if (domain->bits.hsk)
> - regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
> - domain->bits.hsk, on ? domain->bits.hsk : 0);
> + if (domain->bits.hsk) {
> + ret = regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
> + domain->bits.hsk,
> + on ? domain->bits.hsk : 0);
> + if (ret) {
> + dev_err(domain->dev, "Failed to initiate handshake\n");
> + goto disable_power_control;
> + }
> + }
>
> - regmap_update_bits(domain->regmap, offset,
> - domain->bits.pxx, domain->bits.pxx);
> + ret = regmap_update_bits(domain->regmap, offset,
> + domain->bits.pxx, domain->bits.pxx);
> + if (ret) {
> + dev_err(domain->dev, "failed to command PGC\n");
> + goto disable_power_control;
> + }
>
> /*
> * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
> @@ -173,8 +197,15 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
> !(pxx_req & domain->bits.pxx),
> 0, USEC_PER_MSEC);
> - if (ret) {
> + if (ret)
> dev_err(domain->dev, "failed to command PGC\n");
> +
> +disable_power_control:
> + if (enable_power_control)
> + regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> + GPC_PGC_CTRL_PCR, 0);
> +
> + if (ret) {
> /*
> * If we were in a process of enabling a
> * domain and failed we might as well disable
> @@ -185,10 +216,7 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> on = !on;
> }
>
> - if (enable_power_control)
> - regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> - GPC_PGC_CTRL_PCR, 0);
> -
> +disable_clocks:
> /* Disable reset clocks for all devices in the domain */
> for (i = 0; i < domain->num_clks; i++)
> clk_disable_unprepare(domain->clk[i]);
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list