[PATCH 1/2] ARM: dts: dra76-evm: remove ov5640

Tomi Valkeinen tomi.valkeinen at ideasonboard.com
Mon Apr 12 09:26:16 BST 2021


On 12/04/2021 11:00, Laurent Pinchart wrote:
> Hi Tomi,
> 
> Thank you for the patch.
> 
> On Mon, Apr 12, 2021 at 10:53:05AM +0300, Tomi Valkeinen wrote:
>> DRA76 EVM boards are not shipped with OV5640 sensor module, it is a
>> separate purchase. OV5640 module is also just one of the possible
>> sensors or capture boards you can connect.
>>
>> However, for some reason, OV5640 has been added to the board dts file,
>> making it cumbersome to use other sensors.
>>
>> Remove the OV5640 from the dts file so that it is easy to use other
>> sensors via DT overlays.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
>> ---
>>   arch/arm/boot/dts/dra76-evm.dts | 27 ---------------------------
>>   1 file changed, 27 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
>> index 9bd01ae40b1d..f3c900e1b953 100644
>> --- a/arch/arm/boot/dts/dra76-evm.dts
>> +++ b/arch/arm/boot/dts/dra76-evm.dts
>> @@ -158,12 +158,6 @@ aic_dvdd: fixedregulator-aic_dvdd {
>>   		regulator-max-microvolt = <1800000>;
>>   	};
>>   
>> -	clk_ov5640_fixed: clock {
>> -		compatible = "fixed-clock";
>> -		#clock-cells = <0>;
>> -		clock-frequency = <24000000>;
>> -	};
>> -
>>   	hdmi0: connector {
>>   		compatible = "hdmi-connector";
>>   		label = "hdmi";
>> @@ -409,22 +403,6 @@ tlv320aic3106: tlv320aic3106 at 19 {
>>   &i2c5 {
>>   	status = "okay";
>>   	clock-frequency = <400000>;
>> -
>> -	ov5640 at 3c {
>> -		compatible = "ovti,ov5640";
>> -		reg = <0x3c>;
>> -
>> -		clocks = <&clk_ov5640_fixed>;
>> -		clock-names = "xclk";
>> -
>> -		port {
>> -			csi2_cam0: endpoint {
>> -				remote-endpoint = <&csi2_phy0>;
>> -				clock-lanes = <0>;
>> -				data-lanes = <1 2>;
>> -			};
>> -		};
>> -	};
>>   };
> 
> You could drop the node completely.
> 
>>   
>>   &cpu0 {
>> @@ -574,11 +552,6 @@ can-transceiver {
>>   };
>>   
>>   &csi2_0 {
>> -	csi2_phy0: endpoint {
>> -		remote-endpoint = <&csi2_cam0>;
>> -		clock-lanes = <0>;
>> -		data-lanes = <1 2>;
>> -	};
>>   };
> 
> And here too.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> 
> Is there an overlay available somewhere for this ?

I have a work branch for dra76 and am654 overlays for TI's DT overlay tree:

https://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux-dt.git/commit/?h=multistream/work&id=c997e4854164cbfcf11174e9c7d012967b6f399d
https://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux-dt.git/commit/?h=multistream/work&id=311bdaaa28ba16b0142f5879fc7c79aa3aa5906d

I have not sent these to TI yet.

  Tomi



More information about the linux-arm-kernel mailing list