[PATCH 5/6] usb: xhci-mtk: use clock bulk to get clocks
Chunfeng Yun
chunfeng.yun at mediatek.com
Thu Apr 8 10:35:13 BST 2021
Use clock bulk helpers to get/enable/disable clocks, meanwhile
make sys_ck optional, then will be easier to handle clocks.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 109 +++++++-----------------------------
drivers/usb/host/xhci-mtk.h | 10 ++--
2 files changed, 24 insertions(+), 95 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 30927f4064d4..d4c455eecb8d 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -7,7 +7,6 @@
* Chunfeng Yun <chunfeng.yun at mediatek.com>
*/
-#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
@@ -220,89 +219,6 @@ static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
return xhci_mtk_host_enable(mtk);
}
-static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
-{
- struct device *dev = mtk->dev;
-
- mtk->sys_clk = devm_clk_get(dev, "sys_ck");
- if (IS_ERR(mtk->sys_clk)) {
- dev_err(dev, "fail to get sys_ck\n");
- return PTR_ERR(mtk->sys_clk);
- }
-
- mtk->xhci_clk = devm_clk_get_optional(dev, "xhci_ck");
- if (IS_ERR(mtk->xhci_clk))
- return PTR_ERR(mtk->xhci_clk);
-
- mtk->ref_clk = devm_clk_get_optional(dev, "ref_ck");
- if (IS_ERR(mtk->ref_clk))
- return PTR_ERR(mtk->ref_clk);
-
- mtk->mcu_clk = devm_clk_get_optional(dev, "mcu_ck");
- if (IS_ERR(mtk->mcu_clk))
- return PTR_ERR(mtk->mcu_clk);
-
- mtk->dma_clk = devm_clk_get_optional(dev, "dma_ck");
- return PTR_ERR_OR_ZERO(mtk->dma_clk);
-}
-
-static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
-{
- int ret;
-
- ret = clk_prepare_enable(mtk->ref_clk);
- if (ret) {
- dev_err(mtk->dev, "failed to enable ref_clk\n");
- goto ref_clk_err;
- }
-
- ret = clk_prepare_enable(mtk->sys_clk);
- if (ret) {
- dev_err(mtk->dev, "failed to enable sys_clk\n");
- goto sys_clk_err;
- }
-
- ret = clk_prepare_enable(mtk->xhci_clk);
- if (ret) {
- dev_err(mtk->dev, "failed to enable xhci_clk\n");
- goto xhci_clk_err;
- }
-
- ret = clk_prepare_enable(mtk->mcu_clk);
- if (ret) {
- dev_err(mtk->dev, "failed to enable mcu_clk\n");
- goto mcu_clk_err;
- }
-
- ret = clk_prepare_enable(mtk->dma_clk);
- if (ret) {
- dev_err(mtk->dev, "failed to enable dma_clk\n");
- goto dma_clk_err;
- }
-
- return 0;
-
-dma_clk_err:
- clk_disable_unprepare(mtk->mcu_clk);
-mcu_clk_err:
- clk_disable_unprepare(mtk->xhci_clk);
-xhci_clk_err:
- clk_disable_unprepare(mtk->sys_clk);
-sys_clk_err:
- clk_disable_unprepare(mtk->ref_clk);
-ref_clk_err:
- return ret;
-}
-
-static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
-{
- clk_disable_unprepare(mtk->dma_clk);
- clk_disable_unprepare(mtk->mcu_clk);
- clk_disable_unprepare(mtk->xhci_clk);
- clk_disable_unprepare(mtk->sys_clk);
- clk_disable_unprepare(mtk->ref_clk);
-}
-
/* only clocks can be turn off for ip-sleep wakeup mode */
static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
{
@@ -367,6 +283,19 @@ static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable)
usb_wakeup_ip_sleep_set(mtk, enable);
}
+static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
+{
+ struct clk_bulk_data *clks = mtk->clks;
+
+ clks[0].id = "sys_ck";
+ clks[1].id = "xhci_ck";
+ clks[2].id = "ref_ck";
+ clks[3].id = "mcu_ck";
+ clks[4].id = "dma_ck";
+
+ return devm_clk_bulk_get_optional(mtk->dev, BULK_CLKS_NUM, clks);
+}
+
static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk)
{
int ret;
@@ -522,7 +451,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
if (ret)
goto disable_pm;
- ret = xhci_mtk_clks_enable(mtk);
+ ret = clk_bulk_prepare_enable(BULK_CLKS_NUM, mtk->clks);
if (ret)
goto disable_ldos;
@@ -625,7 +554,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
usb_put_hcd(hcd);
disable_clk:
- xhci_mtk_clks_disable(mtk);
+ clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
disable_ldos:
xhci_mtk_ldos_disable(mtk);
@@ -655,7 +584,7 @@ static int xhci_mtk_remove(struct platform_device *pdev)
usb_put_hcd(shared_hcd);
usb_put_hcd(hcd);
xhci_mtk_sch_exit(mtk);
- xhci_mtk_clks_disable(mtk);
+ clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
xhci_mtk_ldos_disable(mtk);
pm_runtime_disable(dev);
@@ -682,7 +611,7 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev)
if (ret)
goto restart_poll_rh;
- xhci_mtk_clks_disable(mtk);
+ clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
usb_wakeup_set(mtk, true);
return 0;
@@ -703,7 +632,7 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
int ret;
usb_wakeup_set(mtk, false);
- ret = xhci_mtk_clks_enable(mtk);
+ ret = clk_bulk_prepare_enable(BULK_CLKS_NUM, mtk->clks);
if (ret)
goto enable_wakeup;
@@ -719,7 +648,7 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
return 0;
disable_clks:
- xhci_mtk_clks_disable(mtk);
+ clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
enable_wakeup:
usb_wakeup_set(mtk, true);
return ret;
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 621ec1a85009..11996edc1967 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -9,8 +9,12 @@
#ifndef _XHCI_MTK_H_
#define _XHCI_MTK_H_
+#include <linux/clk.h>
+
#include "xhci.h"
+#define BULK_CLKS_NUM 5
+
/**
* To simplify scheduler algorithm, set a upper limit for ESIT,
* if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
@@ -140,11 +144,7 @@ struct xhci_hcd_mtk {
int u3p_dis_msk;
struct regulator *vusb33;
struct regulator *vbus;
- struct clk *sys_clk; /* sys and mac clock */
- struct clk *xhci_clk;
- struct clk *ref_clk;
- struct clk *mcu_clk;
- struct clk *dma_clk;
+ struct clk_bulk_data clks[BULK_CLKS_NUM];
struct regmap *pericfg;
struct phy **phys;
int num_phys;
--
2.18.0
More information about the linux-arm-kernel
mailing list