[PATCH v1 0/7] imx-gpcv2 improvements

[Lucas Stach]

Hi Adrien,

I feel like I already mentioned to you some time ago that there is
already a much more complete patch series to add this functionality on
the list [1].

If you want this functionality to go upstream, please help test and
extend this patch series.

Regards,
Lucas

[1] https://lore.kernel.org/linux-arm-kernel/20201105174434.1817539-1-l.stach@pengutronix.de/

Am Mittwoch, dem 07.04.2021 um 23:21 +0200 schrieb Adrien Grassein:
> Hi,
> 
> This patch set aims is to add the support of the i.MX8 MM power domains
> on the mainline kernel.
> 
> To achieve this, I do several patches
>   - Check errors when reading or writing registers (concerns i.MX8M base
>     implementation);
>   - Fix power up/down sequence. Handshake was not checked and it was
>     not called at the appropriate time (concerns i.MX8M base
> implementaions);
>   - Allow domains without power sequence control like the HSIOMIX of the
>     i.MX8MM.
>   - Add some i.MX8MM domains (HSIO and OTGS);
>   - Introduce quirks. For example, i.MX8MM OTG domains should not be
>     powered off (seen n the source code of th i.MX ATF). Quirks are
> easily upgrable for other cases.
>   - Finally I defined power domains into the imx8mm.dtb file.
> 
> I know that this kind of patch is rejected by NXP ut the other way
> (callin ATF directly) was also rejected.
> 
> I also know that NXP is concerned abou adding hundred lines of codes for
> each new SOC but it' the way it works on Linux. And the "added code"
> mainly consist of adding structures, defines and generic methods for
> regmap.
> 
> If it's a real problem, maybe we can introduc a new "gpcv3" driver for
> i.MX8MM, i.MX8MN and i.MX8MP.
> 
> Thanks,  
> 
> Adrien Grassein (7):
>   soc: imx: gpcv2: check for errors when r/w registers
>   soc: imx: gpcv2: Fix power up/down sequence
>   soc: imx: gpcv2: allow domains without power sequence control
>   dt-bindings: power: fsl,imx-gpcv2: add definitions for i.MX8MM
>   soc: imx: gpcv2: add HSIOMIX and USB domains for i.MX8MM
>   soc: imx: gpcv2: add quirks to domains
>   arm64: dts: imx8mm: add power-domains
> 
>  .../bindings/power/fsl,imx-gpcv2.yaml         |   7 +-
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi     |  35 ++
>  drivers/soc/imx/gpcv2.c                       | 336 ++++++++++++++----
>  include/dt-bindings/power/imx8mm-power.h      |  21 ++
>  4 files changed, 333 insertions(+), 66 deletions(-)
>  create mode 100644 include/dt-bindings/power/imx8mm-power.h
>