[PATCH v4 2/6] dt-bindings: PCI: Add bindings for Brcmstb endpoint device voltage regulators

[Jim Quinlan]

On Tue, Apr 6, 2021 at 12:47 PM Mark Brown <broonie at kernel.org> wrote:
>
> On Thu, Apr 01, 2021 at 05:21:42PM -0400, Jim Quinlan wrote:
> > Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
> > allows optional regulators to be attached and controlled by the PCIe RC
> > driver.  That being said, this driver searches in the DT subnode (the EP
> > node, eg pci at 0,0) for the regulator property.
>
> > The use of a regulator property in the pcie EP subnode such as
> > "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
> > file at
> >
> > https://github.com/devicetree-org/dt-schema/pull/54
> >
> > Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
> > ---
> >  Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > index f90557f6deb8..f2caa5b3b281 100644
> > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -64,6 +64,9 @@ properties:
> >
> >    aspm-no-l0s: true
> >
> > +  vpcie12v-supply: true
> > +  vpcie3v3-supply: true
> > +
>
> No great problem with having these in the controller node (assming it
> accurately describes the hardware) but I do think we ought to also be
> able to describe these per slot.

Hi Mark,
Can you explain what you think that would look like in the DT?
Thanks,
Jim Quinlan
Broadcom STB