[PATCH v8 02/13] dt-bindings: media: nxp,imx8mq-vpu: Update the bindings for G2 support

Hans Verkuil hverkuil-cisco at xs4all.nl
Tue Apr 6 11:57:50 BST 2021


On 01/04/2021 17:59, Benjamin Gaignard wrote:
> Introducing G2 hevc video decoder lead to modify the bindings to allow
> to get one node per VPUs.

Introducing the G2 hevc video decoder requires modifications of the bindings to allow
one node per VPU.

> VPUs share one hardware control block which is provided as a phandle on
> an syscon.

an -> a

> Each node got now one reg and one interrupt.

got now -> has now

> Add a compatible for G2 hardware block: nxp,imx8mq-vpu-g2.
> 
> To be compatible with older DT the driver is still capable to use 'ctrl'

use -> use the

> reg-name even if it is deprecated now.

Regards,

	Hans

> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
> version 7:
> - Add Rob and Philipp reviewed-by tag
> - Change syscon phandle name to nxp,imx8m-vpu-ctrl (remove 'q' to be
>   usable for iMX8MM too)
> 
> version 5:
> - This version doesn't break the backward compatibilty between kernel
>   and DT.
> 
>  .../bindings/media/nxp,imx8mq-vpu.yaml        | 53 ++++++++++++-------
>  1 file changed, 34 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> index 762be3f96ce9..18e7d40a5f24 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
> @@ -15,22 +15,18 @@ description:
>  
>  properties:
>    compatible:
> -    const: nxp,imx8mq-vpu
> +    oneOf:
> +      - const: nxp,imx8mq-vpu
> +      - const: nxp,imx8mq-vpu-g2
>  
>    reg:
> -    maxItems: 3
> -
> -  reg-names:
> -    items:
> -      - const: g1
> -      - const: g2
> -      - const: ctrl
> +    maxItems: 1
>  
>    interrupts:
> -    maxItems: 2
> +    maxItems: 1
>  
>    interrupt-names:
> -    items:
> +    oneOf:
>        - const: g1
>        - const: g2
>  
> @@ -46,14 +42,18 @@ properties:
>    power-domains:
>      maxItems: 1
>  
> +  nxp,imx8m-vpu-ctrl:
> +    description: Specifies a phandle to syscon VPU hardware control block
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
>  required:
>    - compatible
>    - reg
> -  - reg-names
>    - interrupts
>    - interrupt-names
>    - clocks
>    - clock-names
> +  - nxp,imx8m-vpu-ctrl
>  
>  additionalProperties: false
>  
> @@ -62,18 +62,33 @@ examples:
>          #include <dt-bindings/clock/imx8mq-clock.h>
>          #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
> -        vpu: video-codec at 38300000 {
> +        vpu_ctrl: syscon at 38320000 {
> +                 compatible = "nxp,imx8mq-vpu-ctrl", "syscon";
> +                 reg = <0x38320000 0x10000>;
> +        };
> +
> +        vpu_g1: video-codec at 38300000 {
>                  compatible = "nxp,imx8mq-vpu";
> -                reg = <0x38300000 0x10000>,
> -                      <0x38310000 0x10000>,
> -                      <0x38320000 0x10000>;
> -                reg-names = "g1", "g2", "ctrl";
> -                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> -                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> -                interrupt-names = "g1", "g2";
> +                reg = <0x38300000 0x10000>;
> +                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +                interrupt-names = "g1";
> +                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> +                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> +                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> +                clock-names = "g1", "g2", "bus";
> +                power-domains = <&pgc_vpu>;
> +                nxp,imx8m-vpu-ctrl = <&vpu_ctrl>;
> +        };
> +
> +        vpu_g2: video-codec at 38310000 {
> +                compatible = "nxp,imx8mq-vpu-g2";
> +                reg = <0x38300000 0x10000>;
> +                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +                interrupt-names = "g2";
>                  clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>                           <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
>                           <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
>                  clock-names = "g1", "g2", "bus";
>                  power-domains = <&pgc_vpu>;
> +                nxp,imx8m-vpu-ctrl = <&vpu_ctrl>;
>          };
> 




More information about the linux-arm-kernel mailing list