[PATCH 3/5] arm64: dts: mediatek: mt8167: add larb nodes

[Yong Wu]

On Mon, 2021-04-05 at 22:08 +0200, Fabien Parent wrote:
> Add larb nodes for MT8167:
> * larb0 is used for display (dsi and hdmi)
> * larb1 is used for camera (csi)
> * larb2 is used for the video hardware decoder
> 
> Signed-off-by: Fabien Parent <fparent at baylibre.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8167.dtsi | 33 ++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
> index 4b951f81db9e..9b352031c5f6 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
> @@ -140,5 +140,38 @@ smi_common: smi at 14017000 {
>  			clock-names = "apb", "smi";
>  			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
>  		};
> +
> +		larb0: larb at 14016000 {
> +			compatible = "mediatek,mt8167-smi-larb";
> +			reg = <0 0x14016000 0 0x1000>;
> +			mediatek,smi = <&smi_common>;
> +			mediatek,larbid = <0>;

From [1], This should be: mediatek,larb-id.

Actually this property is unnecessary in this SoC since this larb-id in
the m4u node is consecutive.

[1]
https://elixir.bootlin.com/linux/v5.12-rc2/source/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml#L58

> +			clocks = <&mmsys CLK_MM_SMI_LARB0>,
> +				 <&mmsys CLK_MM_SMI_LARB0>;
> +			clock-names = "apb", "smi";
> +			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
> +		};
> +
> +		larb1: larb at 15001000 {
> +			compatible = "mediatek,mt8167-smi-larb";
> +			reg = <0 0x15001000 0 0x1000>;
> +			mediatek,smi = <&smi_common>;
> +			mediatek,larbid = <1>;
> +			clocks = <&imgsys CLK_IMG_LARB1_SMI>,
> +				 <&imgsys CLK_IMG_LARB1_SMI>;
> +			clock-names = "apb", "smi";
> +			power-domains = <&spm MT8167_POWER_DOMAIN_ISP>;
> +		};
> +
> +		larb2: larb at 16010000 {
> +			compatible = "mediatek,mt8167-smi-larb";
> +			reg = <0 0x16010000 0 0x1000>;
> +			mediatek,smi = <&smi_common>;
> +			mediatek,larbid = <2>;
> +			clocks = <&vdecsys CLK_VDEC_CKEN>,
> +				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
> +			clock-names = "apb", "smi";
> +			power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>;
> +		};
>  	};
>  };