[GIT PULL] arm64: dts: TI K3 updates for v5.13
Nishanth Menon
nm at ti.com
Mon Apr 5 16:53:36 BST 2021
Hi,
Please pull the following device tree changes for v5.13 cycle.
The following changes since commit a38fd8748464831584a19438cbb3082b5a2dab15:
Linux 5.12-rc2 (2021-03-05 17:33:41 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.13
for you to fetch changes up to 112e5934ff3a7505e583365213a27f990922b76b:
arm64: dts: ti: k3-am64-main: Fix ospi compatible (2021-04-01 08:50:33 -0500)
----------------------------------------------------------------
Devicetree changes for TI K3 platforms for v5.13 merge window:
* New SoCs:
- AM642 mean for industrial control, motor control, remote IO, IoT gateway etc.
* New Boards:
- AM65: Siemens SIMATIC IOT2050 advanced and basic boards
- AM64: EVM and SK boards
* New peripherals:
- AM65: watchdog
- AM65,J721E: ICSSG
- J7200: OSPI, GPIO
* Fixes:
- AM65: pcie node fixup, ospi speed updates
- J721e, J7200: MMC speed updates, ospi speed updates and compatibles fixups.
----------------------------------------------------------------
Aswath Govindraju (7):
arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM
arm64: dts: ti: k3-am64-main: Add DT node for USB subsystem
arm64: dts: ti: k3-am642-evm: Add USB support
arm64: dts: ti: k3-am64: Add GPIO DT nodes
arm64: dts: ti: k3-am642: reserve gpio in mcu domain for firmware usage
arm64: dts: ti: k3-j7200: Add support for higher speed modes and update delay select values for MMCSD subsystems
Dave Gerlach (4):
dt-bindings: arm: ti: Add bindings for AM642 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
arm64: dts: ti: Add support for AM642 SoC
arm64: dts: ti: Add support for AM642 EVM
Faiz Abbas (2):
arm64: dts: ti: k3-j7200: Add gpio nodes
arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules
Grygorii Strashko (1):
arm64: dts: ti: k3-am64-main: add main CPTS entry
Jan Kiszka (5):
arm64: dts: ti: k3-am65-main: Add device_type to pcie*_rc nodes
arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
dt-bindings: Add Siemens vendor prefix
dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards
arm64: dts: ti: Add support for Siemens IOT2050 boards
Lokesh Vutla (2):
dt-bindings: arm: ti: Add bindings for AM642 SK
arm64: dts: ti: Add support for AM642 SK
Peter Ujfalusi (1):
arm64: dts: ti: k3-am64-main: Enable DMA support
Pratyush Yadav (6):
arm64: dts: ti: k3-j721e-som-p0: Enable 8D-8D-8D mode on OSPI
arm64: dts: ti: am654-base-board: Enable 8D-8D-8D mode on OSPI
arm64: dts: ti: k3-j7200-som-p0: Add nodes for OSPI0
arm64: dts: ti: k3-j721e-mcu: Fix ospi compatible
arm64: dts: ti: k3-j7200-mcu: Fix ospi compatible
arm64: dts: ti: k3-am64-main: Fix ospi compatible
Suman Anna (5):
arm64: dts: ti: k3-am65-main: Add ICSSG nodes
arm64: dts: ti: k3-j721e-main: Add ICSSG nodes
arm64: dts: ti: k3-am64-main: Add hwspinlock node
arm64: dts: ti: k3-am64-main: Add mailbox cluster nodes
arm64: dts: ti: k3-am642-evm/sk: Add IPC sub-mailbox nodes
Vignesh Raghavendra (6):
arm64: dts: ti: k3-am64-main: Add CPSW DT node
arm64: dts: ti: k3-am642-evm: add CPSW3g DT nodes
arm64: dts: ti: k3-am642-sk: Add CPSW DT nodes
arm64: dts: ti: k3-am64-main: Add ADC nodes
arm64: dts: ti: k3-am64-main: Add OSPI node
arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node
Documentation/devicetree/bindings/arm/ti/k3.yaml | 9 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/ti/Makefile | 8 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 675 +++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 103 ++++
arch/arm64/boot/dts/ti/k3-am64.dtsi | 105 ++++
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 468 ++++++++++++++
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 334 ++++++++++
arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 ++
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 655 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 395 ++++++++++++
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 9 +
arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts | 61 ++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 4 +-
.../boot/dts/ti/k3-am6548-iot2050-advanced.dts | 60 ++
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 94 +++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 86 ++-
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 51 ++
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 36 ++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 279 ++++++++-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 4 +-
include/dt-bindings/pinctrl/k3.h | 5 +-
23 files changed, 3501 insertions(+), 11 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-sk.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210405/5578c25c/attachment.sig>
More information about the linux-arm-kernel
mailing list