[PATCH] Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"

[Gregory CLEMENT]

The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.

So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.

This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87.
Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")

Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 64179a372ecf..c6f5df2deccf 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -310,9 +310,11 @@ CP11X_LABEL(usb3_1): usb at 510000 {
 		};
 
 		CP11X_LABEL(sata0): sata at 540000 {
-			compatible = "marvell,armada-8k-ahci";
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
 			reg = <0x540000 0x30000>;
 			dma-coherent;
+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&CP11X_LABEL(clk) 1 15>,
 				 <&CP11X_LABEL(clk) 1 16>;
 			#address-cells = <1>;
@@ -320,12 +322,10 @@ CP11X_LABEL(sata0): sata at 540000 {
 			status = "disabled";
 
 			sata-port at 0 {
-				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0>;
 			};
 
 			sata-port at 1 {
-				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <1>;
 			};
 		};
-- 
2.30.2