[PATCH v4 06/18] arm64: arch_timer: Implement support for interrupt-names

[Hector Martin]

This allows the devicetree to correctly represent the available set of
timers, which varies from device to device, without the need for fake
dummy interrupts for unavailable slots.

Also add the hyp-virt timer/PPI, which is not currently used, but worth
representing.

Reviewed-by: Tony Lindgren <tony at atomide.com>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Reviewed-by: Marc Zyngier <maz at kernel.org>
Signed-off-by: Hector Martin <marcan at marcan.st>
---
 drivers/clocksource/arm_arch_timer.c | 24 +++++++++++++++++++++---
 include/clocksource/arm_arch_timer.h |  1 +
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d0177824c518..932f95691e27 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -63,6 +63,14 @@ struct arch_timer {
 static u32 arch_timer_rate;
 static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
 
+static const char *arch_timer_ppi_names[ARCH_TIMER_MAX_TIMER_PPI] = {
+	[ARCH_TIMER_PHYS_SECURE_PPI]	= "sec-phys",
+	[ARCH_TIMER_PHYS_NONSECURE_PPI]	= "phys",
+	[ARCH_TIMER_VIRT_PPI]		= "virt",
+	[ARCH_TIMER_HYP_PPI]		= "hyp-phys",
+	[ARCH_TIMER_HYP_VIRT_PPI]	= "hyp-virt",
+};
+
 static struct clock_event_device __percpu *arch_timer_evt;
 
 static enum arch_timer_ppi_nr arch_timer_uses_ppi = ARCH_TIMER_VIRT_PPI;
@@ -1280,8 +1288,9 @@ static void __init arch_timer_populate_kvm_info(void)
 
 static int __init arch_timer_of_init(struct device_node *np)
 {
-	int i, ret;
+	int i, irq, ret;
 	u32 rate;
+	bool has_names;
 
 	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
 		pr_warn("multiple nodes in dt, skipping\n");
@@ -1289,8 +1298,17 @@ static int __init arch_timer_of_init(struct device_node *np)
 	}
 
 	arch_timers_present |= ARCH_TIMER_TYPE_CP15;
-	for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
-		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+	has_names = of_property_read_bool(np, "interrupt-names");
+
+	for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++) {
+		if (has_names)
+			irq = of_irq_get_byname(np, arch_timer_ppi_names[i]);
+		else
+			irq = of_irq_get(np, i);
+		if (irq > 0)
+			arch_timer_ppi[i] = irq;
+	}
 
 	arch_timer_populate_kvm_info();
 
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 1d68d5613dae..73c7139c866f 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -32,6 +32,7 @@ enum arch_timer_ppi_nr {
 	ARCH_TIMER_PHYS_NONSECURE_PPI,
 	ARCH_TIMER_VIRT_PPI,
 	ARCH_TIMER_HYP_PPI,
+	ARCH_TIMER_HYP_VIRT_PPI,
 	ARCH_TIMER_MAX_TIMER_PPI
 };
 
-- 
2.30.0