[PATCH v4 0/6] PCI: brcmstb: add slot0 device regulators and panic handler

[Jim Quinlan]

v4 [NOTE: I'm not sure this fixes RobH and MarkB constraints but I'd
          like to use this pullreq as a basis for future discussion.]
   [Commit: Add bindings for ...]
     -- Fix syntax error in YAML bindings example (RobH)
     -- {vpcie12v,vpcie3v3}-supply props are back in root complex DT node
        (I believe RobH said this was okay)
   [Commit: Add control of ..]
     -- Do not do global search for regulator; now we look specifically
        for the property {vpcie12v,vpcie3v3}-supply in the root complex
	DT node and then call devm_regulator_bulk_get() (MarkB)
     -- Use devm_regulator_bulk_get() (Bjorn)
     -- s/EP/slot0 device/ (Bjorn)
     -- Spelling, capitalization (Bjorn)
     -- Have brcm_phy_stop() return a void (Bjorn)
   [Commit: Do not turn off ...]
     -- Capitalization (Bjorn)
   [Commit: Check return value ...]
     -- Commit message content (Bjorn)
     -- Move 6/6 hunk to 2/6 where it belongs (Bjorn)
     -- Move the rest of 6/6 before all other commits (Bjorn)

v3 -- Driver now searches for EP DT subnode for any regulators to turn on.
      If present, these regulators have the property names
      "vpcie12v-supply" and "vpcie3v3-supply".  The existence of these
      regulators in the EP subnode are currently pending as a pullreq
      in pci-bus.yaml at
      https://github.com/devicetree-org/dt-schema/pull/54
      (MarkB, RobH).
   -- Check return of brcm_set_regulators() (Florian)
   -- Specify one regulator string per line for easier update (Florian)
   -- Author/Committer/Signoff email changed from that of V2 from
      'james.quinlan at broadcom.com' to 'jim2101024 at gmail.com'.

v2 -- Use regulator bulk API rather than multiple calls (MarkB).

v1 -- Bindings are added for fixed regulators that may power the EP device.
   -- The brcmstb RC driver is modified to control these regulators
      during probe, suspend, and resume.
   -- 7216 type SOCs have additional error reporting HW and a
      panic handler is added to dump its info.
   -- A missing return value check is added.



Jim Quinlan (6):
  PCI: brcmstb: Check return value of clk_prepare_enable()
  dt-bindings: PCI: Add bindings for Brcmstb endpoint device voltage
    regulators
  PCI: brcmstb: Add control of slot0 device voltage regulators
  PCI: brcmstb: Do not turn off regulators if EP can wake up
  PCI: brcmstb: Give 7216 SOCs their own config type
  PCI: brcmstb: Add panic/die handler to RC driver

 .../bindings/pci/brcm,stb-pcie.yaml           |   4 +
 drivers/pci/controller/pcie-brcmstb.c         | 262 +++++++++++++++++-
 2 files changed, 259 insertions(+), 7 deletions(-)

-- 
2.17.1