[PATCH v5 80/80] ARM: dts: bcm2711: Enable the display pipeline
maxime at cerno.tech
Wed Sep 30 10:07:58 EDT 2020
On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
> On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
> > Now that all the drivers have been adjusted for it, let's bring in the
> > necessary device tree changes.
> > The VEC and PV3 are left out for now, since it will require a more specific
> > clock setup.
> > Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> > Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
> > Tested-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> > Tested-by: Stefan Wahren <stefan.wahren at i2se.com>
> > Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> Apologies if this has already been reported or have a solution but this
> patch (and presumably series) breaks output to the serial console after
> a certain point during init. On Raspbian, I see systemd startup messages
> then the output just turns into complete garbage. It looks like this
> patch is merged first in linux-next, which is why my bisect fell on the
> DRM merge. I am happy to provide whatever information could be helpful
> for debugging this. I am on the latest version of the firmware
> (currently 26620cc9a63c6cb9965374d509479b4ee2c30241).
Unfortunately, the miniUART is in the same clock tree than the core
clock and will thus have those kind of issues when the core clock is
changed (which is also something that one should expect when using the
DRM or other drivers).
The only real workaround there would be to switch to one of the PL011
UARTs. I guess we can also somehow make the UART react to the core clock
frequency changes, but that's going to require some effort
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 228 bytes
Desc: not available
More information about the linux-arm-kernel