[PATCH 10/14] dt-bindings: arm: fsl: document i.MX6DL boards

[Krzysztof Kozlowski]

On Sat, Sep 26, 2020 at 06:28:07PM +0200, Krzysztof Kozlowski wrote:
> Document and adjust the compatibles for i.MX6DL based boards.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
>  .../devicetree/bindings/arm/fsl.yaml          | 27 +++++++++++++++++--
>  1 file changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index d9c430bfe37e..24c79cecd815 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -257,16 +257,25 @@ properties:
>        - description: i.MX6DL based Boards
>          items:
>            - enum:
> -              - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
> -              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
> +              - boundary,imx6dl-nit6xlite     # Boundary Devices Nitrogen6 Lite
> +              - boundary,imx6dl-nitrogen6x    # Boundary Devices Nitrogen6x
> +              - bticino,imx6dl-mamoj      # BTicino i.MX6DL Mamoj
>                - eckelmann,imx6dl-ci4x10
>                - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
>                - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
> +              - engicam,imx6-icore        # Engicam i.CoreM6 Starter Kit
> +              - engicam,imx6-icore-rqs    # Engicam i.CoreM6 RQS Starter Kit
>                - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
> +              - fsl,imx6dl-sabrelite      # i.MX6 DualLite SABRE Lite Board
>                - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
> +              - karo,imx6dl-tx6dl         # Ka-Ro electronics TX6U Modules
>                - kontron,imx6dl-samx6i     # Kontron i.MX6 Solo SMARC Module
> +              - poslab,imx6dl-savageboard # Poslab SavageBoard Dual
>                - prt,prtrvt                # Protonic RVT board
>                - prt,prtvt7                # Protonic VT7 board
> +              - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
> +              - riot,imx6s-riotboard      # RIoTboard i.MX6S
> +              - solidrun,hummingboard/dl
>                - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
>                - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
>                - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
> @@ -277,12 +286,26 @@ properties:
>                - toradex,colibri_imx6dl-v1_1     # Colibri iMX6 Module V1.1
>                - toradex,colibri_imx6dl-eval-v3  # Colibri iMX6 Module on Colibri Evaluation Board V3
>                - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3

I need to add here two solidrun boards and fix up the Toradex boards.
I will send a v2.

Best regards,
Krzysztof