[PATCH v5 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX

[Roger Quadros]

The USB controller can be connected to one of the 2 lanes
of SERDES0 using a MUX. Add a MUX controller node for that.

Signed-off-by: Roger Quadros <rogerq at ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 8997276158ca..c638c3d8c0f2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -31,6 +31,12 @@
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
 					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
 		};
+
+		usb_serdes_mux: mux-controller at 4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
 	};
 
 	gic500: interrupt-controller at 1800000 {
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki