[PATCH v4 2/7] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Jagan Teki
jagan at amarulasolutions.com
Tue Sep 29 04:32:12 EDT 2020
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
SOM's like PX30.Core needs to mount on top of this Evaluation board
for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
---
Changes for v4:
- none
Changes for v3:
- sort regulator nodes properties
- drop cap-mmc-highspeed property
- add Amarula Solutions copyright
Changes for v2:
- move carrier enablement nodes in carrier dtsi
.../dts/rockchip/px30-engicam-common.dtsi | 39 +++++++++++++++++++
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 ++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
new file mode 100644
index 000000000000..bd5bde989e8d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys"; /* +5V */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_3v3>; /* +3V3_SOM */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
+ vqmmc-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 000000000000..cb00988953e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
--
2.25.1
More information about the linux-arm-kernel
mailing list