[PATCH 4/7] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings

[Rob Herring]

On Mon, 28 Sep 2020 10:45:37 +0530, Varadarajan Narayanan wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
> 
> Signed-off-by: Varadarajan Narayanan <varada at codeaurora.org>
> ---
>  .../bindings/pinctrl/qcom,ipq5018-pinctrl.yaml     | 143 +++++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.example.dt.yaml: pinctrl at 1000000: serial3-pinmux:function:0: 'blsp2_uart' is not one of ['atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'audio_pdm0', 'audio_pdm1', 'audio_rxbclk', 'audio_rxd', 'audio_rxfsync', 'audio_rxmclk', 'audio_txbclk', 'audio_txd', 'audio_txfsync', 'audio_txmclk', 'blsp0_i2c', 'blsp0_spi', 'blsp0_uart0', 'blsp0_uart1', 'blsp1_i2c0', 'blsp1_i2c1', 'blsp1_spi0', 'blsp1_spi1', 'blsp1_uart0', 'blsp1_uart1', 'blsp1_uart2', 'blsp2_i2c0', 'blsp2_i2c1', 'blsp2_spi', 'blsp2_spi0', 'blsp2_spi1', 'btss0', 'btss1', 'btss10', 'btss11', 'btss12', 'btss13', 'btss2', 'btss3', 'btss4', 'btss5', 'btss6', 'btss7', 'btss8', 'btss9', 'burn0', 'burn1', 'cri_trng', 'cri_trng0', 'cri_trng1', 'cxc_clk', 'cxc_data', 'dbg_out', 'eud_gpio', 'gcc_plltest', 'gcc_tlmm', 'gpio', 'mac0', 'mac1', 'mdc', 'mdio', 'pcie0_clk', 'pcie0_wake', 'pcie1_clk', 'pcie1_wake', 'pll_test', 'prng_rosc', 'pwm0', 'pwm1', 'pwm2', 'pwm3', 'qdss_cti_trig_in_a0', 'qdss_cti_trig_in_a1', 'qdss_cti_trig_in_b0', 'qdss_cti_trig_in_b1', 'qdss_cti_trig_out_a0', 'qdss_cti_trig_out_a1', 'qdss_cti_trig_out_b0', 'qdss_cti_trig_out_b1', 'qdss_traceclk_a', 'qdss_traceclk_b', 'qdss_tracectl_a', 'qdss_tracectl_b', 'qdss_tracedata_a', 'qdss_tracedata_b', 'qspi_clk', 'qspi_cs', 'qspi0', 'qspi1', 'qspi2', 'qspi3', 'reset_out', 'sdc1_clk', 'sdc1_cmd', 'sdc10', 'sdc11', 'sdc12', 'sdc13', 'wci0', 'wci1', 'wci2', 'wci3', 'wci4', 'wci5', 'wci6', 'wci7', 'wsa_swrm', 'wsi_clk3', 'wsi_data3', 'wsis_reset', 'xfem0', 'xfem1', 'xfem2', 'xfem3', 'xfem4', 'xfem5', 'xfem6', 'xfem7']
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml


See https://patchwork.ozlabs.org/patch/1372367

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.