[PATCH v7 00/11] clk: imx8: add new clock binding for better pm support

Aisheng Dong aisheng.dong at nxp.com
Sun Sep 27 00:13:44 EDT 2020


Gently ping again...

@Stephen Boyd
Could you kindly provide some feedback how we can proceed this?

Regards
Aisheng

> From: Dong Aisheng <dongas86 at gmail.com>
> Sent: Wednesday, September 2, 2020 2:36 PM
> 
> Hi Stephen,
> 
> Would you help look at this?
> Now only one patch left that still does not have a R-b tag and needs your review.
> [PATCH v7 03/11] clk: imx: scu: add two cells binding support All other patches
> already get R-b tags.
> 
> Regards
> Aisheng
> 
> On Mon, Aug 17, 2020 at 3:42 PM Dong Aisheng <dongas86 at gmail.com>
> wrote:
> >
> > Gently ping...
> >
> > On Wed, Jul 29, 2020 at 4:04 PM Dong Aisheng <dongas86 at gmail.com>
> wrote:
> > >
> > > Hi Stephen,
> > >
> > > This patchset addressed all your new comments.
> > > Right now only Patch 2/3 still haven't got any R-b or A-b tags. So
> > > still need your help to review.
> > > All other patches already got the R-b tags.
> > >
> > > BTW, for [PATCH v7 02/11] dt-bindings: clock: imx-lpcg: add support
> > > to parse  clocks from device tree.
> > > It was reviewed by Rob/Shawn and you before, however, due to the
> > > legacy binding file has been removed and changed to json format.
> > > So this patch also updated to json format accordingly based on the
> > > former reviewed patch and need a re-review.
> > >
> > > Regards
> > > Aisheng
> > >
> > > On Wed, Jul 29, 2020 at 4:04 PM Dong Aisheng <aisheng.dong at nxp.com>
> wrote:
> > > >
> > > > This patch series is a preparation for the MX8 Architecture improvement.
> > > > As for IMX SCU based platforms like MX8QM and MX8QXP, they are
> > > > comprised of a couple of SS(Subsystems) while most of them within
> > > > the same SS can be shared. e.g. Clocks, Devices and etc.
> > > >
> > > > However, current clock binding is using SW IDs for device tree to
> > > > use which can cause troubles in writing the common
> > > > <soc>-ss-xx.dtsi file for different SoCs.
> > > >
> > > > This patch series aims to introduce a new binding which is more
> > > > close to hardware and platform independent and can makes us write
> > > > a more general drivers for different SCU based SoCs.
> > > >
> > > > Another important thing is that on MX8, each Clock resource is
> > > > associated with a power domain. So we have to attach that clock
> > > > device to the power domain in order to make it work properly.
> > > > Further more, the clock state will be lost when its power domain
> > > > is completely off during suspend/resume, so we also introduce the clock
> state save&restore mechanism.
> > > >
> > > > It's based on latest shanw/for-next branch.
> > > >
> > > > The top commit is:
> > > > 3c1a41dab7b8 Merge branch 'imx/defconfig' into for-next
> > > >
> > > > ChangeLog:
> > > > v6->v7:
> > > >  * addressed all comments from Stephen
> > > >  * rebased to latest shawn/for-next
> > > > v5->v6:
> > > >  * add scu clk unregister if add provider failed
> > > > v4->v5:
> > > >  * Address all comments from Stephen
> > > > v3->v4:
> > > >  * use clk-indices for LPCG to fetch each clks offset from dt
> > > > v2->v3:
> > > >  * change scu clk into two cells binding
> > > >  * add clk pm patches to ease the understand of the changes
> > > > v1->v2:
> > > >  * SCU clock changed to one cell clock binding inspired by arm,scpi.txt
> > > >    Documentation/devicetree/bindings/arm/arm,scpi.txt
> > > >  * Add required power domain property
> > > >  * Dropped PATCH 3&4 first, will send the updated version accordingly
> > > >    after the binding is finally determined,
> > > >
> > > > Dong Aisheng (11):
> > > >   dt-bindings: firmware: imx-scu: new binding to parse clocks from
> > > >     device tree
> > > >   dt-bindings: clock: imx-lpcg: add support to parse clocks from device
> > > >     tree
> > > >   clk: imx: scu: add two cells binding support
> > > >   clk: imx: scu: bypass cpu power domains
> > > >   clk: imx: scu: allow scu clk to take device pointer
> > > >   clk: imx: scu: add runtime pm support
> > > >   clk: imx: scu: add suspend/resume support
> > > >   clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
> > > >   clk: imx: lpcg: allow lpcg clk to take device pointer
> > > >   clk: imx: clk-imx8qxp-lpcg: add runtime pm support
> > > >   clk: imx: lpcg: add suspend/resume support
> > > >
> > > >  .../bindings/arm/freescale/fsl,scu.txt        |  12 +-
> > > >  .../bindings/clock/imx8qxp-lpcg.yaml          |  79 ++++--
> > > >  drivers/clk/imx/clk-imx8qxp-lpcg.c            | 139 +++++++++++
> > > >  drivers/clk/imx/clk-imx8qxp.c                 | 136 +++++-----
> > > >  drivers/clk/imx/clk-lpcg-scu.c                |  53 +++-
> > > >  drivers/clk/imx/clk-scu.c                     | 234
> +++++++++++++++++-
> > > >  drivers/clk/imx/clk-scu.h                     |  56 ++++-
> > > >  include/dt-bindings/clock/imx8-lpcg.h         |  14 ++
> > > >  8 files changed, 620 insertions(+), 103 deletions(-)  create mode
> > > > 100644 include/dt-bindings/clock/imx8-lpcg.h
> > > >
> > > > --
> > > > 2.23.0
> > > >


More information about the linux-arm-kernel mailing list