[PATCH 0/7] Pine64 PineCube support

Maxime Ripard maxime at cerno.tech
Fri Sep 25 11:12:41 EDT 2020


Hi,

On Wed, Sep 23, 2020 at 08:57:02AM +0800, Icenowy Zheng wrote:
> Pine64 PineCube is an IP camera based on Allwinner S3 chip.
> 
> This patchset tries to add support for it.
> 
> In order to make sure the system do not hang when camera is brought up,
> a fix to AXP209 driver is needed (sent individually), otherwise the
> system will hang because it changes the voltage of LDO2 when LDO4
> tweaking.

Queued all the patches for 5.11

> Icenowy Zheng (7):
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
>   dt-bindings: arm: sunxi: add Pine64 PineCube binding
>   ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera

However, I guess for the next patches to the v3s DTSI we should just
have a simpler prefix (like v3), it's really taking a lot of characters
here :)

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20200925/03054fba/attachment.sig>


More information about the linux-arm-kernel mailing list