[PATCH 02/12] soc: mediatek: Add MediaTek SCPSYS power domains
Matthias Brugger
mbrugger at suse.com
Fri Sep 25 06:43:16 EDT 2020
On 25/09/2020 12:25, Weiyi Lu wrote:
> On Thu, 2020-09-10 at 19:28 +0200, Enric Balletbo i Serra wrote:
>> The System Control Processor System (SCPSYS) has several power management
>> related tasks in the system. This driver implements support to handle
>> the different power domains supported in order to meet high performance
>> and low power requirements.
>>
>> Co-developed-by: Matthias Brugger <mbrugger at suse.com>
>> Signed-off-by: Matthias Brugger <mbrugger at suse.com>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>> ---
>>
>> drivers/soc/mediatek/Kconfig | 13 +
>> drivers/soc/mediatek/Makefile | 1 +
>> drivers/soc/mediatek/mtk-pm-domains.c | 626 ++++++++++++++++++++++++++
>> 3 files changed, 640 insertions(+)
>> create mode 100644 drivers/soc/mediatek/mtk-pm-domains.c
>>
>> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
>> index 59a56cd790ec..68d800f9e4a5 100644
>> --- a/drivers/soc/mediatek/Kconfig
>> +++ b/drivers/soc/mediatek/Kconfig
>> @@ -44,6 +44,19 @@ config MTK_SCPSYS
>> Say yes here to add support for the MediaTek SCPSYS power domain
>> driver.
>>
>> +config MTK_SCPSYS_PM_DOMAINS
>> + bool "MediaTek SCPSYS generic power domain"
>> + default ARCH_MEDIATEK
>> + depends on PM
>> + depends on MTK_INFRACFG
>> + select PM_GENERIC_DOMAINS
>> + select REGMAP
>> + help
>> + Say y here to enable power domain support.
>> + In order to meet high performance and low power requirements, the System
>> + Control Processor System (SCPSYS) has several power management related
>> + tasks in the system.
>> +
>> config MTK_MMSYS
>> bool "MediaTek MMSYS Support"
>> default ARCH_MEDIATEK
>> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
>> index 01f9f873634a..1e60fb4f89d4 100644
>> --- a/drivers/soc/mediatek/Makefile
>> +++ b/drivers/soc/mediatek/Makefile
>> @@ -3,4 +3,5 @@ obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
>> obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
>> obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>> obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
>> +obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
>> obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
>> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
>> new file mode 100644
>> index 000000000000..db631dbaf2e3
>> --- /dev/null
>> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
>> @@ -0,0 +1,626 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2020 Collabora Ltd.
>> + */
>> +#include <linux/clk.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/of_clk.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_domain.h>
>> +#include <linux/soc/mediatek/infracfg.h>
>> +
>> +#include <dt-bindings/power/mt8173-power.h>
>> +
>> +#define MTK_POLL_DELAY_US 10
>> +#define MTK_POLL_TIMEOUT USEC_PER_SEC
>> +
>> +#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)
>> +#define MTK_SCPD_FWAIT_SRAM BIT(1)
>> +#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
>> +
>> +#define SPM_VDE_PWR_CON 0x0210
>> +#define SPM_MFG_PWR_CON 0x0214
>> +#define SPM_VEN_PWR_CON 0x0230
>> +#define SPM_ISP_PWR_CON 0x0238
>> +#define SPM_DIS_PWR_CON 0x023c
>> +#define SPM_VEN2_PWR_CON 0x0298
>> +#define SPM_AUDIO_PWR_CON 0x029c
>> +#define SPM_MFG_2D_PWR_CON 0x02c0
>> +#define SPM_MFG_ASYNC_PWR_CON 0x02c4
>> +#define SPM_USB_PWR_CON 0x02cc
>> +
>
> If me, I'd choose to write directly into the data of each SoC now
> because it's inconsistent on most MediatTek chips.
>
What do you mean with "write directly into the data of each SoC"?
>> +#define SPM_PWR_STATUS 0x060c
>> +#define SPM_PWR_STATUS_2ND 0x0610
>> +
>> +#define PWR_RST_B_BIT BIT(0)
>> +#define PWR_ISO_BIT BIT(1)
>> +#define PWR_ON_BIT BIT(2)
>> +#define PWR_ON_2ND_BIT BIT(3)
>> +#define PWR_CLK_DIS_BIT BIT(4)
>> +
>> +#define PWR_STATUS_DISP BIT(3)
>> +#define PWR_STATUS_MFG BIT(4)
>> +#define PWR_STATUS_ISP BIT(5)
>> +#define PWR_STATUS_VDEC BIT(7)
>> +#define PWR_STATUS_VENC_LT BIT(20)
>> +#define PWR_STATUS_VENC BIT(21)
>> +#define PWR_STATUS_MFG_2D BIT(22)
>> +#define PWR_STATUS_MFG_ASYNC BIT(23)
>> +#define PWR_STATUS_AUDIO BIT(24)
>> +#define PWR_STATUS_USB BIT(25)
>> +
>
> same here for the status bits.
>
Up to now we have litte collisions in the different defines. Not sure what you
propose.
>> +struct scpsys_bus_prot_data {
>> + u32 bus_prot_mask;
>> + bool bus_prot_reg_update;
>> +};
>> +
>> +/**
>> + * struct scpsys_domain_data - scp domain data for power on/off flow
>> + * @sta_mask: The mask for power on/off status bit.
>> + * @ctl_offs: The offset for main power control register.
>> + * @sram_pdn_bits: The mask for sram power control bits.
>> + * @sram_pdn_ack_bits: The mask for sram power control acked bits.
>> + * @caps: The flag for active wake-up action.
>> + * @bp_infracfg: bus protection for infracfg subsystem
>> + */
>> +struct scpsys_domain_data {
>> + u32 sta_mask;
>> + int ctl_offs;
>> + u32 sram_pdn_bits;
>> + u32 sram_pdn_ack_bits;
>> + u8 caps;
>> + const struct scpsys_bus_prot_data bp_infracfg;
>> +};
>> +
>> +struct scpsys_domain {
>> + struct generic_pm_domain genpd;
>> + const struct scpsys_domain_data *data;
>> + struct scpsys *scpsys;
>> + int num_clks;
>> + struct clk_bulk_data *clks;
>> + struct regmap *infracfg;
>
> Could we move
> struct regmap *infracfg;
> back to struct scpsys? It seems we need to set this property many times
> under each power domain sub node in device tree?
>
With the new design only the power domain that needs infracfg/smi will actually
get a handle to the regmap.
That allows us to describe the HW better in device tree.
This is done once when we load the driver I don't see why this should be an
issue (if you were referring to the fact that it takes longer do this several
times instead of once). So I think it is a good trade-off.
>> +};
>> +
>> +struct scpsys_soc_data {
>> + const struct scpsys_domain_data *domains;
>> + int num_domains;
>> + int pwr_sta_offs;
>> + int pwr_sta2nd_offs;
>> +};
>> +
>> +struct scpsys {
>> + struct device *dev;
>> + void __iomem *base;
>> + const struct scpsys_soc_data *soc_data;
>> + struct genpd_onecell_data pd_data;
>> + struct generic_pm_domain *domains[];
>> +};
>> +
>> +#define to_scpsys_domain(gpd) container_of(gpd, struct scpsys_domain, genpd)
>> +
>> +static int scpsys_domain_is_on(struct scpsys_domain *pd)
>> +{
>> + struct scpsys *scpsys = pd->scpsys;
>> +
>> + u32 status = readl(scpsys->base + scpsys->soc_data->pwr_sta_offs) & pd->data->sta_mask;
>> + u32 status2 = readl(scpsys->base + scpsys->soc_data->pwr_sta2nd_offs) & pd->data->sta_mask;
>> +
>> + /*
>> + * A domain is on when both status bits are set. If only one is set
>> + * return an error. This happens while powering up a domain
>> + */
>> +
>> + if (status && status2)
>> + return true;
>> + if (!status && !status2)
>> + return false;
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int scpsys_sram_enable(struct scpsys_domain *pd, void __iomem *ctl_addr)
>> +{
>> + u32 pdn_ack = pd->data->sram_pdn_ack_bits;
>> + u32 val;
>> + int tmp;
>> + int ret;
>> +
>> + val = readl(ctl_addr);
>> + val &= ~pd->data->sram_pdn_bits;
>> + writel(val, ctl_addr);
>> +
>> + /* Either wait until SRAM_PDN_ACK all 1 or 0 */
>> + ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0, MTK_POLL_DELAY_US,
>> + MTK_POLL_TIMEOUT);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int scpsys_sram_disable(struct scpsys_domain *pd, void __iomem *ctl_addr)
>> +{
>> + u32 pdn_ack = pd->data->sram_pdn_ack_bits;
>> + u32 val;
>> + int tmp;
>> +
>> + val = readl(ctl_addr);
>> + val |= pd->data->sram_pdn_bits;
>> + writel(val, ctl_addr);
>> +
>> + /* Either wait until SRAM_PDN_ACK all 1 or 0 */
>> + return readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, MTK_POLL_DELAY_US,
>> + MTK_POLL_TIMEOUT);
>> +}
>> +
>> +static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
>> +{
>> + const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
>> +
>> + if (!bp_data->bus_prot_mask)
>> + return 0;
>> +
>> + return mtk_infracfg_set_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
>> + bp_data->bus_prot_reg_update);
>> +}
>> +
>> +static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
>> +{
>> + const struct scpsys_bus_prot_data *bp_data = &pd->data->bp_infracfg;
>> +
>> + if (!bp_data->bus_prot_mask)
>> + return 0;
>> +
>> + return mtk_infracfg_clear_bus_protection(pd->infracfg, bp_data->bus_prot_mask,
>> + bp_data->bus_prot_reg_update);
>> +}
>> +
>> +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> +{
>> + struct scpsys_domain *pd = container_of(genpd, struct scpsys_domain, genpd);
>> + struct scpsys *scpsys = pd->scpsys;
>> + void __iomem *ctl_addr = scpsys->base + pd->data->ctl_offs;
>> + int ret, tmp;
>> + u32 val;
>> +
>> + ret = clk_bulk_enable(pd->num_clks, pd->clks);
>> + if (ret)
>> + return ret;
>> +
>> + /* subsys power on */
>> + val = readl(ctl_addr);
>> + val |= PWR_ON_BIT;
>> + writel(val, ctl_addr);
>> + val |= PWR_ON_2ND_BIT;
>> + writel(val, ctl_addr);
>> +
>> + /* wait until PWR_ACK = 1 */
>> + ret = readx_poll_timeout(scpsys_domain_is_on, pd, tmp, tmp > 0, MTK_POLL_DELAY_US,
>> + MTK_POLL_TIMEOUT);
>> + if (ret < 0)
>> + goto err_pwr_ack;
>> +
>> + val &= ~PWR_CLK_DIS_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val &= ~PWR_ISO_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val |= PWR_RST_B_BIT;
>> + writel(val, ctl_addr);
>> +
>> + ret = scpsys_sram_enable(pd, ctl_addr);
>> + if (ret < 0)
>> + goto err_pwr_ack;
>> +
>> + ret = scpsys_bus_protect_disable(pd);
>> + if (ret < 0)
>> + goto err_pwr_ack;
>> +
>> + return 0;
>> +
>> +err_pwr_ack:
>> + clk_bulk_disable(pd->num_clks, pd->clks);
>> + dev_err(scpsys->dev, "Failed to power on domain %s\n", genpd->name);
>> +
>> + return ret;
>> +}
>> +
>> +static int scpsys_power_off(struct generic_pm_domain *genpd)
>> +{
>> + struct scpsys_domain *pd = container_of(genpd, struct scpsys_domain, genpd);
>> + struct scpsys *scpsys = pd->scpsys;
>> + void __iomem *ctl_addr = scpsys->base + pd->data->ctl_offs;
>> + int ret, tmp;
>> + u32 val;
>> +
>> + ret = scpsys_bus_protect_enable(pd);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = scpsys_sram_disable(pd, ctl_addr);
>> + if (ret < 0)
>> + return ret;
>> +
>> + /* subsys power off */
>> + val = readl(ctl_addr);
>> + val |= PWR_ISO_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val &= ~PWR_RST_B_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val |= PWR_CLK_DIS_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val &= ~PWR_ON_BIT;
>> + writel(val, ctl_addr);
>> +
>> + val &= ~PWR_ON_2ND_BIT;
>> + writel(val, ctl_addr);
>> +
>> + /* wait until PWR_ACK = 0 */
>> + ret = readx_poll_timeout(scpsys_domain_is_on, pd, tmp, tmp == 0, MTK_POLL_DELAY_US,
>> + MTK_POLL_TIMEOUT);
>> + if (ret < 0)
>> + return ret;
>> +
>> + clk_bulk_disable(pd->num_clks, pd->clks);
>> +
>> + return 0;
>> +}
>> +
>> +static int scpsys_add_one_domain(struct scpsys *scpsys, struct device_node *node)
>> +{
>> + const struct scpsys_domain_data *domain_data;
>> + struct scpsys_domain *pd;
>> + int i, ret;
>> + u32 id;
>> +
>> + ret = of_property_read_u32(node, "reg", &id);
>> + if (ret) {
>> + dev_err(scpsys->dev, "%pOFn: failed to retrieve domain id from reg: %d\n", node,
>> + ret);
>> + return -EINVAL;
>> + }
>> +
>> + if (id >= scpsys->soc_data->num_domains) {
>> + dev_err(scpsys->dev, "%pOFn: invalid domain id %d\n", node, id);
>> + return -EINVAL;
>> + }
>> +
>> + domain_data = &scpsys->soc_data->domains[id];
>> + if (!domain_data) {
>> + dev_err(scpsys->dev, "%pOFn: undefined domain id %d\n", node, id);
>> + return -EINVAL;
>> + }
>> +
>> + pd = devm_kzalloc(scpsys->dev, sizeof(*pd), GFP_KERNEL);
>> + if (!pd)
>> + return -ENOMEM;
>> +
>> + pd->data = domain_data;
>> + pd->scpsys = scpsys;
>> +
>> + pd->infracfg = syscon_regmap_lookup_by_phandle(node, "mediatek,infracfg");
>> + if (IS_ERR(pd->infracfg))
>> + pd->infracfg = NULL;
>> +
>> + pd->num_clks = of_clk_get_parent_count(node);
>> + if (pd->num_clks > 0) {
>> + pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
>> + if (!pd->clks)
>> + return -ENOMEM;
>> + } else {
>> + pd->num_clks = 0;
>> + }
>> +
>> + for (i = 0; i < pd->num_clks; i++) {
>> + pd->clks[i].clk = of_clk_get(node, i);
>
> Is it possible to have a better way that we could use of_clk_bulk_get()?
>
>> + if (IS_ERR(pd->clks[i].clk)) {
>> + ret = PTR_ERR(pd->clks[i].clk);
>> + dev_err(scpsys->dev, "%pOFn: failed to get clk at index %d: %d\n", node, i,
>> + ret);
>> + return ret;
>> + }
>> + }
>> +
>> + ret = clk_bulk_prepare(pd->num_clks, pd->clks);
>> + if (ret)
>> + goto err_put_clocks;
>> +
>> + /*
>> + * Initially turn on all domains to make the domains usable
>> + * with !CONFIG_PM and to get the hardware in sync with the
>> + * software. The unused domains will be switched off during
>> + * late_init time.
>> + */
>> + ret = scpsys_power_on(&pd->genpd);
>> + if (ret < 0) {
>> + dev_err(scpsys->dev, "failed to power on domain %pOFN with error %d\n", node, ret);
>> + goto err_unprepare_clocks;
>> + }
>> +
>> + pd->genpd.name = node->name;
>> + pd->genpd.power_off = scpsys_power_off;
>> + pd->genpd.power_on = scpsys_power_on;
>> +
>> + pm_genpd_init(&pd->genpd, NULL, false);
>> +
>> + scpsys->domains[id] = &pd->genpd;
>> + return 0;
>> +
>> +err_unprepare_clocks:
>> + clk_bulk_unprepare(pd->num_clks, pd->clks);
>> +err_put_clocks:
>> + clk_bulk_put(pd->num_clks, pd->clks);
>> + devm_kfree(scpsys->dev, pd->clks);
>> + pd->num_clks = 0;
>> + return ret;
>> +}
>> +
>> +static int scpsys_add_subdomain(struct scpsys *scpsys, struct device_node *parent)
>> +{
>> + struct device_node *child;
>> + struct generic_pm_domain *child_pd, *parent_pd;
>> + int ret;
>> +
>> + for_each_child_of_node(parent, child) {
>> + u32 id;
>> +
>> + ret = of_property_read_u32(parent, "reg", &id);
>> + if (ret) {
>> + dev_err(scpsys->dev, "%pOFn: failed to get parent domain id: %d\n", child,
>> + ret);
>> + goto err_put_node;
>> + }
>> + parent_pd = scpsys->pd_data.domains[id];
>> +
>
> nit. Could we move parent outside(in front of) the loop?
>
Yes, I think that makes sense.
Regards,
Matthias
More information about the linux-arm-kernel
mailing list