[PATCH 08/11] usb: gadget: bdc: use the BIT macro to define bit filed
Chunfeng Yun
chunfeng.yun at mediatek.com
Fri Sep 25 01:58:16 EDT 2020
Prefer using the BIT macro to define bit fileds
Change-Id: I021f6230c4c3248aa89aed808495c1a950df772e
Cc: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
Acked-by: Florian Fainelli <f.fainelli at gmail.com>
---
drivers/usb/gadget/udc/bdc/bdc.h | 84 ++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
index f8d5958..8d00b12 100644
--- a/drivers/usb/gadget/udc/bdc/bdc.h
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -102,7 +102,7 @@
#define BDC_SPB(p) ((p) & 0x7)
/* BDC Capability1 */
-#define BDC_P64 (1 << 0)
+#define BDC_P64 BIT(0)
/* BDC Command register */
#define BDC_CMD_FH 0xe
@@ -111,7 +111,7 @@
#define BDC_CMD_BLA 0x3
#define BDC_CMD_EPC 0x2
#define BDC_CMD_DVC 0x1
-#define BDC_CMD_CWS (0x1 << 5)
+#define BDC_CMD_CWS BIT(5)
#define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6)
#define BDC_CMD_EPN(p) (((p) & 0x1f) << 10)
#define BDC_SUB_CMD_ADD (0x1 << 17)
@@ -124,7 +124,7 @@
#define BDC_SUB_CMD_EP_STP (0x2 << 17)
#define BDC_SUB_CMD_EP_STL (0x4 << 17)
#define BDC_SUB_CMD_EP_RST (0x1 << 17)
-#define BDC_CMD_SRD (1 << 27)
+#define BDC_CMD_SRD BIT(27)
/* CMD completion status */
#define BDC_CMDS_SUCC 0x1
@@ -141,19 +141,19 @@
#define EPM_SHIFT 4
/* BDC USPSC */
-#define BDC_VBC (1 << 31)
-#define BDC_PRC (1 << 30)
-#define BDC_PCE (1 << 29)
-#define BDC_CFC (1 << 28)
-#define BDC_PCC (1 << 27)
-#define BDC_PSC (1 << 26)
-#define BDC_VBS (1 << 25)
-#define BDC_PRS (1 << 24)
-#define BDC_PCS (1 << 23)
+#define BDC_VBC BIT(31)
+#define BDC_PRC BIT(30)
+#define BDC_PCE BIT(29)
+#define BDC_CFC BIT(28)
+#define BDC_PCC BIT(27)
+#define BDC_PSC BIT(26)
+#define BDC_VBS BIT(25)
+#define BDC_PRS BIT(24)
+#define BDC_PCS BIT(23)
#define BDC_PSP(p) (((p) & (0x7 << 20))>>20)
-#define BDC_SCN (1 << 8)
-#define BDC_SDC (1 << 7)
-#define BDC_SWS (1 << 4)
+#define BDC_SCN BIT(8)
+#define BDC_SDC BIT(7)
+#define BDC_SWS BIT(4)
#define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf)
#define BDC_PSP(p) (((p) & (0x7 << 20))>>20)
@@ -167,17 +167,17 @@
#define BDC_PST_MASK 0xf
/* USPPMS */
-#define BDC_U2E (0x1 << 31)
-#define BDC_U1E (0x1 << 30)
-#define BDC_U2A (0x1 << 29)
-#define BDC_PORT_W1S (0x1 << 17)
+#define BDC_U2E BIT(31)
+#define BDC_U1E BIT(30)
+#define BDC_U2A BIT(29)
+#define BDC_PORT_W1S BIT(17)
#define BDC_U1T(p) ((p) & 0xff)
#define BDC_U2T(p) (((p) & 0xff) << 8)
#define BDC_U1T_MASK 0xff
/* USBPM2 */
/* Hardware LPM Enable */
-#define BDC_HLE (1 << 16)
+#define BDC_HLE BIT(16)
/* BDC Status and Control */
#define BDC_COP_RST (1 << 29)
@@ -186,11 +186,11 @@
#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP)
-#define BDC_COS (1 << 28)
+#define BDC_COS BIT(28)
#define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20)
-#define BDC_MASK_MCW (1 << 7)
-#define BDC_GIE (1 << 1)
-#define BDC_GIP (1 << 0)
+#define BDC_MASK_MCW BIT(7)
+#define BDC_GIE BIT(1)
+#define BDC_GIP BIT(0)
#define BDC_HLT 1
#define BDC_NOR 2
@@ -201,19 +201,19 @@
#define BD_CHAIN 0xf
#define BD_TFS_SHIFT 4
-#define BD_SOT (1 << 26)
-#define BD_EOT (1 << 27)
-#define BD_ISP (1 << 29)
-#define BD_IOC (1 << 30)
-#define BD_SBF (1 << 31)
+#define BD_SOT BIT(26)
+#define BD_EOT BIT(27)
+#define BD_ISP BIT(29)
+#define BD_IOC BIT(30)
+#define BD_SBF BIT(31)
#define BD_INTR_TARGET(p) (((p) & 0x1f) << 27)
-#define BDC_SRR_RWS (1 << 4)
-#define BDC_SRR_RST (1 << 3)
-#define BDC_SRR_ISR (1 << 2)
-#define BDC_SRR_IE (1 << 1)
-#define BDC_SRR_IP (1 << 0)
+#define BDC_SRR_RWS BIT(4)
+#define BDC_SRR_RST BIT(3)
+#define BDC_SRR_ISR BIT(2)
+#define BDC_SRR_IE BIT(1)
+#define BDC_SRR_IP BIT(0)
#define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24)
#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16)
#define BDC_SRR_DPI_MASK 0x00ff0000
@@ -221,7 +221,7 @@
#define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT)
/* Control transfer BD specific fields */
-#define BD_DIR_IN (1 << 25)
+#define BD_DIR_IN BIT(25)
#define BDC_PTC_MASK 0xf0000000
@@ -241,13 +241,13 @@
/* Transfer BD fields */
#define BD_LEN(p) ((p) & 0x1ffff)
-#define BD_LTF (1 << 25)
+#define BD_LTF BIT(25)
#define BD_TYPE_DS 0x1
#define BD_TYPE_SS 0x2
-#define BDC_EP_ENABLED (1 << 0)
-#define BDC_EP_STALL (1 << 1)
-#define BDC_EP_STOP (1 << 2)
+#define BDC_EP_ENABLED BIT(0)
+#define BDC_EP_STALL BIT(1)
+#define BDC_EP_STOP BIT(2)
/* One BD can transfer max 65536 bytes */
#define BD_MAX_BUFF_SIZE (1 << 16)
@@ -266,9 +266,9 @@
/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */
#define BDC_TNOTIFY 2500 /*in ms*/
/* Devstatus bitfields */
-#define REMOTE_WAKEUP_ISSUED (1 << 16)
-#define DEVICE_SUSPENDED (1 << 17)
-#define FUNC_WAKE_ISSUED (1 << 18)
+#define REMOTE_WAKEUP_ISSUED BIT(16)
+#define DEVICE_SUSPENDED BIT(17)
+#define FUNC_WAKE_ISSUED BIT(18)
#define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP)
/* On disconnect, preserve these bits and clear rest */
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list