[PATCH] ARM: dts: stm32: Fix DH PDK2 display PWM channel

[Marek Vasut]

On 9/23/20 4:32 PM, Alexandre Torgue wrote:
> Hi Marek

Hi,

> On 8/22/20 10:32 PM, Marek Vasut wrote:
>> The display PWM channel is number 3 (PWM2 CH4), make it so.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Alexandre Torgue <alexandre.torgue at st.com>
>> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> Cc: Patrice Chotard <patrice.chotard at st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>> Cc: linux-stm32 at st-md-mailman.stormreply.com
>> To: linux-arm-kernel at lists.infradead.org
>> ---
>>   arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>> b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>> index 7c4bd615b311..075e2a95713f 100644
>> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>> @@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec {
>>         display_bl: display-bl {
>>           compatible = "pwm-backlight";
>> -        pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
>> +        pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
>>           brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
>>           default-brightness-level = <8>;
>>           enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
>>
> 
> 
> Applied on stm32-next.

Don't you want to pick the one with the Fixes: tag ? :)