[PATCH] ARM: dts: kirkwood: replace status value "ok" by "okay"

[Gregory CLEMENT]

Hello Adrian,

> While the DT parser recognizes "ok" as a valid value for the
> "status" property, it is actually mentioned nowhere. Use the
> proper value "okay" instead, as done in the majority of files
> already.
>

Applied on mvebu/dt

Thanks,

Gregory

> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> ---
>  arch/arm/boot/dts/kirkwood-dockstar.dts             | 2 +-
>  arch/arm/boot/dts/kirkwood-dreamplug.dts            | 2 +-
>  arch/arm/boot/dts/kirkwood-goflexnet.dts            | 2 +-
>  arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts | 2 +-
>  arch/arm/boot/dts/kirkwood-iconnect.dts             | 2 +-
>  arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts       | 2 +-
>  arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi       | 2 +-
>  arch/arm/boot/dts/kirkwood.dtsi                     | 4 ++--
>  8 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
> index 6a3f1bf6d9f1..264938dfa4d9 100644
> --- a/arch/arm/boot/dts/kirkwood-dockstar.dts
> +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
> @@ -34,7 +34,7 @@
>  			};
>  		};
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  	};
>  	gpio-leds {
> diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
> index 7f326e267494..328516351e84 100644
> --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
> +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
> @@ -34,7 +34,7 @@
>  			};
>  		};
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		spi at 10600 {
> diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
> index 02d87e0a1061..d4cb3cd3e2a2 100644
> --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
> +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
> @@ -66,7 +66,7 @@
>  			};
>  		};
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		sata at 80000 {
> diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
> index ff1260ee3fe8..dfb41393941d 100644
> --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
> +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
> @@ -38,7 +38,7 @@
>  			};
>  		};
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		sata at 80000 {
> diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
> index 4a512d80912c..95af7aa1fdcb 100644
> --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
> +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
> @@ -72,7 +72,7 @@
>  			};
>  		};
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  	};
>  
> diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
> index 62272d58664f..2338f495d517 100644
> --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
> +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
> @@ -112,7 +112,7 @@
>  		};
>  
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		sata at 80000 {
> diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
> index 2c4037b07282..8f73197f251a 100644
> --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
> @@ -45,7 +45,7 @@
>  		};
>  
>  		serial at 12000 {
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		sata at 80000 {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 6c8d94beae78..fca31a5d5ac7 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -369,7 +369,7 @@
>  			clocks = <&gate_clk 14>;
>  			clock-names = "sata";
>  			#phy-cells = <0>;
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		sata_phy1: sata-phy at 84000 {
> @@ -378,7 +378,7 @@
>  			clocks = <&gate_clk 15>;
>  			clock-names = "sata";
>  			#phy-cells = <0>;
> -			status = "ok";
> +			status = "okay";
>  		};
>  
>  		audio0: audio-controller at a0000 {
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com