[PATCH v3 3/6] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings

[Krzysztof Kozlowski]

On Tue, 22 Sep 2020 at 18:45, Jun Li <jun.li at nxp.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Krzysztof Kozlowski <krzk at kernel.org>
> > Sent: Tuesday, September 22, 2020 10:33 PM
> > To: Jun Li <jun.li at nxp.com>
> > Cc: robh+dt at kernel.org; shawnguo at kernel.org; balbi at kernel.org;
> > mathias.nyman at intel.com; gregkh at linuxfoundation.org;
> > s.hauer at pengutronix.de; kernel at pengutronix.de; festevam at gmail.com;
> > dl-linux-imx <linux-imx at nxp.com>; Anson Huang <anson.huang at nxp.com>;
> > Aisheng Dong <aisheng.dong at nxp.com>; Peng Fan <peng.fan at nxp.com>; Andy Duan
> > <fugang.duan at nxp.com>; Joakim Zhang <qiangqing.zhang at nxp.com>; Horia
> > Geanta <horia.geanta at nxp.com>; linux-usb at vger.kernel.org;
> > devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> > Subject: Re: [PATCH v3 3/6] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3
> > glue bindings
> >
> > On Tue, 22 Sep 2020 at 12:56, Li Jun <jun.li at nxp.com> wrote:
> > >
> > > NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic to
> > > support low power mode, the glue layer is for this wakeup
> > > functionality, which has a separated interrupt, can support wakeup
> > > from U3 and connect events for host, and vbus wakeup for device.
> > >
> > > Signed-off-by: Li Jun <jun.li at nxp.com>
> > > ---
> > >  .../devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml   | 99
> > ++++++++++++++++++++++
> > >  1 file changed, 99 insertions(+)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
> > > b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
> > > new file mode 100644
> > > index 0000000..a5d5566
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
> > > @@ -0,0 +1,99 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright
> > > +(c) 2020 NXP %YAML 1.2
> > > +---
> > > +$id:
> > >
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > >
> > +cetree.org%2Fschemas%2Fusb%2Ffsl%2Cimx8mp-dwc3.yaml%23&data=02%7C
> > >
> > +01%7Cjun.li%40nxp.com%7Ceaedeb64ec15472183d108d85f046841%7C686ea1d3bc
> > >
> > +2b4c6fa92cd99c5c301635%7C0%7C0%7C637363819819667936&sdata=IvFQ8l0
> > > +7VXUMbG8riyITSTZb1P50oIXs%2BkAV%2FeX8ntk%3D&reserved=0
> > > +$schema:
> > >
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > >
> > +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=02%7C01%7Cjun.li%40
> > >
> > +nxp.com%7Ceaedeb64ec15472183d108d85f046841%7C686ea1d3bc2b4c6fa92cd99c
> > >
> > +5c301635%7C0%7C0%7C637363819819677934&sdata=H3%2BcwgiLKBynHv4N%2F
> > > +dogBi3SwaizVHmqieJXVrErv0I%3D&reserved=0
> > > +
> > > +title: NXP iMX8MP Soc USB Controller
> > > +
> > > +maintainers:
> > > +  - Li Jun <jun.li at nxp.com>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    items:
> >
> > Items are not necessary
> >
> >
> > > +    - const: fsl,imx8mp-dwc3
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: Address and length of the register set for the wrapper
> > of
> > > +      dwc3 core on the SOC.
> > > +
> > > +  "#address-cells":
> > > +    enum: [ 1, 2 ]
> > > +
> > > +  "#size-cells":
> > > +    enum: [ 1, 2 ]
> > > +
> > > +  ranges: true
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +    description: The interrupt that is asserted when a wakeup event is
> > > +      received.
> > > +
> > > +  clocks:
> > > +    description:
> > > +      A list of phandle and clock-specifier pairs for the clocks
> > > +      listed in clock-names.
> > > +    items:
> > > +      - description: system hsio root clock.
> > > +      - description: suspend clock, used for usb wakeup logic.
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: hsio
> > > +      - const: suspend
> > > +
> > > +# Required child node:
> > > +
> > > +patternProperties:
> > > +  "^dwc3@[0-9a-f]+$":
> > > +    type: object
> > > +    description:
> > > +      A child node must exist to represent the core DWC3 IP block
> > > +      The content of the node is defined in dwc3.txt.
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - "#address-cells"
> > > +  - "#size-cells"
> > > +  - ranges
> > > +  - clocks
> > > +  - clock-names
> > > +  - interrupts
> > > +
> > > +additionalProperties: false
> >
> > Do you actually validate your DTS changes with this schema? They do not look
> > like passing the validation...
>
> I did run dt_binding_check, maybe I missed some errors as there are always some other
> failures, I will re-run to double check.

dt_binding_check is good for the binding and example. Except this you
need to run dtbs_check so your new DTS will be checked. In this case
it points to missing properties in the bindings.

Best regards,
Krzysztof