[PATCH 5/6] ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter
Stefan Riedmueller
s.riedmueller at phytec.de
Tue Sep 22 05:23:12 EDT 2020
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel
LCD display to the phyBOARD-Segin full featured, either with capacitive
or resistive touch.
Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
---
.../dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 1 +
.../dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 1 +
.../dts/imx6ul-phytec-segin-peb-av-02.dtsi | 150 ++++++++++++++++++
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 43 -----
.../dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 1 +
.../dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 1 +
.../dts/imx6ull-phytec-segin-peb-av-02.dtsi | 26 +++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 7 -
8 files changed, 180 insertions(+), 50 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
index 934c05fad615..83ef5af0501e 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
@@ -9,6 +9,7 @@
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index bfda5eda7a25..8296059c0084 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -9,6 +9,7 @@
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 000000000000..86898546627c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2016, 2020 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp at phytec.de>
+ * Author: Stefan Riedmueller <s.riedmueller at phytec.de>
+ */
+
+/ {
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ power-supply = <®_backlight_en>;
+ pwms = <&pwm3 0 5000000>;
+ status = "disabled";
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "edt,etm0700g0edh6";
+ backlight = <&backlight_lcd>;
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcdif_parallel_out>;
+ };
+ };
+ };
+
+ reg_backlight_en: regulator-backlight-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_en>;
+ regulator-name = "backlight-lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat>;
+ status = "disabled";
+
+ port {
+ lcdif_parallel_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+};
+
+&i2c1 {
+ edt_ft5406: touchscreen at 38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5406>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ stmpe: touchscreen at 44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio5>;
+ status = "disabled";
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ touchscreen-inverted-x = <1>;
+ touchscreen-inverted-y = <1>;
+ };
+ };
+};
+
+&pwm3 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_edt_ft5406: edtft5406grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_backlight_en: bachlightengrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 2a3801e349b6..df8d228df89d 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -130,31 +130,6 @@ tlv320: codec at 18 {
status = "disabled";
};
- stmpe: touchscreen at 44 {
- compatible = "st,stmpe811";
- reg = <0x44>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_stmpe>;
- status = "disabled";
-
- stmpe_touchscreen {
- compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
- st,fraction-z = <7>;
- st,i-drive = <1>;
- touchscreen-inverted-x = <1>;
- touchscreen-inverted-y = <1>;
- };
- };
-
i2c_rtc: rtc at 68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_int>;
@@ -176,12 +151,6 @@ ethphy2: ethernet-phy at 2 {
};
};
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "disabled";
-};
-
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
@@ -267,12 +236,6 @@ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
>;
};
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
- >;
- };
-
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
@@ -289,12 +252,6 @@ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
>;
};
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
-
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
index 9648d4ecaf58..8e2a4c5d7765 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -9,6 +9,7 @@
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
index 656baf846453..c8d3eff9ed4b 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -9,6 +9,7 @@
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 000000000000..06bb7f327780
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller at phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+
+&iomuxc {
+ /delete-node/ edtft5406grp;
+ /delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+ pinctrl_edt_ft5406: edtft5406grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
index c1595fc785f7..e287a0453b5f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
@@ -14,7 +14,6 @@ / {
&iomuxc {
/delete-node/ flexcan1engrp;
/delete-node/ rtcintgrp;
- /delete-node/ stmpegrp;
};
&iomuxc_snvs {
@@ -29,10 +28,4 @@ pinctrl_rtc_int: rtcintgrp {
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
-
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
};
--
2.25.1
More information about the linux-arm-kernel
mailing list