[PATCH v7] Add MediaTek MT6779 devapc driver

Neal Liu neal.liu at mediatek.com
Tue Sep 22 03:13:09 EDT 2020


Hi Matthias,

We need this driver supported on main-line.
Could you save your time for us to review it?
Thanks

-Neal

On Wed, 2020-09-16 at 16:58 +0800, Neal Liu wrote:
> Hi Rob, Matthias, Chun-Kuang,
> 
> Sorry for pushing you so hard.
> May I know is this patch set is comfortable to apply on latest kernel?
> Thanks
> 
> -Neal
> 
> On Wed, 2020-09-09 at 16:37 +0800, Neal Liu wrote:
> > Hi Rob, Matthias, Chun-Kuang,
> > 
> > Please kindly let me know your comments about this patch set.
> > Thanks
> > 
> > -Neal
> > 
> > On Wed, 2020-09-02 at 14:40 +0800, Neal Liu wrote:
> > > Hi Rob, Matthias, Chun-Kuang,
> > > 
> > > Gentle ping for this patch set.
> > > Thanks
> > > 
> > > -Neal
> > > 
> > > On Thu, 2020-08-27 at 11:06 +0800, Neal Liu wrote:
> > > > These patch series introduce a MediaTek MT6779 devapc driver.
> > > > 
> > > > MediaTek bus fabric provides TrustZone security support and data protection to prevent slaves from being accessed by unexpected masters.
> > > > The security violation is logged and sent to the processor for further analysis or countermeasures.
> > > > 
> > > > Any occurrence of security violation would raise an interrupt, and it will be handled by mtk-devapc driver.
> > > > The violation information is printed in order to find the murderer.
> > > > 
> > > > changes since v6:
> > > > - remove unnecessary mask/unmask module irq during ISR.
> > > > 
> > > > changes since v5:
> > > > - remove redundant write reg operation.
> > > > - use static variable of vio_dbgs instead.
> > > > - add stop_devapc() if driver is removed.
> > > > 
> > > > changes since v4:
> > > > - refactor data structure.
> > > > - merge two simple functions into one.
> > > > - refactor register setting to prevent too many function call overhead.
> > > > 
> > > > changes since v3:
> > > > - revise violation handling flow to make it more easily to understand
> > > >   hardware behavior.
> > > > - add more comments to understand how hardware works.
> > > > 
> > > > changes since v2:
> > > > - pass platform info through DT data.
> > > > - remove unnecessary function.
> > > > - remove slave_type because it always equals to 1 in current support SoC.
> > > > - use vio_idx_num instread of list all devices' index.
> > > > - add more comments to describe hardware behavior.
> > > > 
> > > > changes since v1:
> > > > - move SoC specific part to DT data.
> > > > - remove unnecessary boundary check.
> > > > - remove unnecessary data type declaration.
> > > > - use read_poll_timeout() instread of for loop polling.
> > > > - revise coding style elegantly.
> > > > 
> > > > 
> > > > *** BLURB HERE ***
> > > > 
> > > > Neal Liu (2):
> > > >   dt-bindings: devapc: add bindings for mtk-devapc
> > > >   soc: mediatek: add mt6779 devapc driver
> > > > 
> > > >  .../bindings/soc/mediatek/devapc.yaml         |  58 ++++
> > > >  drivers/soc/mediatek/Kconfig                  |   9 +
> > > >  drivers/soc/mediatek/Makefile                 |   1 +
> > > >  drivers/soc/mediatek/mtk-devapc.c             | 305 ++++++++++++++++++
> > > >  4 files changed, 373 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
> > > >  create mode 100644 drivers/soc/mediatek/mtk-devapc.c
> > > > 
> > > 
> > > 
> > 
> > 
> 
> 



More information about the linux-arm-kernel mailing list