[PATCH v2 4/4] ARM: dts: add SD5203 dts

[Zhen Lei]

From: Kefeng Wang <wangkefeng.wang at huawei.com>

Add sd5203.dts for Hisilicon SD5203 SoC platform.

Signed-off-by: Kefeng Wang <wangkefeng.wang at huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
---
 arch/arm/boot/dts/Makefile   |  2 +
 arch/arm/boot/dts/sd5203.dts | 96 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 98 insertions(+)
 create mode 100644 arch/arm/boot/dts/sd5203.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae302..1d1262df5c55907 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
 	mps2-an399.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
 	moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
 	imx1-ads.dtb \
 	imx1-apf9328.dtb
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644
index 000000000000000..41113a46a71a584
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	memory at 30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller at 10130000 {
+			compatible = "snps,dw-apb-ictl";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer at 16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer at 16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial at 1600d000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600d000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial at 1600c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600c000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.8.3