[PATCH 2/4] ARM/footbridge: switch to use dma_direct_set_offset for lbus DMA offsets
Christoph Hellwig
hch at lst.de
Thu Sep 17 13:32:27 EDT 2020
Switch the footbridge PCI devices to use dma_direct_set_offset to set the
DMA offset instead of using direct hooks into the DMA mapping code and
remove the now unused hooks.
Signed-off-by: Christoph Hellwig <hch at lst.de>
---
arch/arm/include/asm/dma-direct.h | 4 +-
arch/arm/include/asm/memory.h | 2 -
arch/arm/mach-footbridge/cats-pci.c | 7 +++-
arch/arm/mach-footbridge/common.c | 40 ++++++++++++++-----
arch/arm/mach-footbridge/common.h | 3 ++
arch/arm/mach-footbridge/ebsa285-pci.c | 7 +++-
.../arm/mach-footbridge/include/mach/memory.h | 4 --
arch/arm/mach-footbridge/netwinder-pci.c | 7 +++-
arch/arm/mach-footbridge/personal-pci.c | 7 +++-
9 files changed, 54 insertions(+), 27 deletions(-)
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
index 77fcb7ee5ec907..1f04a5e1c615de 100644
--- a/arch/arm/include/asm/dma-direct.h
+++ b/arch/arm/include/asm/dma-direct.h
@@ -13,12 +13,12 @@ static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
{
if (dev && dev->dma_range_map)
pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn)));
- return (dma_addr_t)__pfn_to_bus(pfn);
+ return (dma_addr_t)__pfn_to_phys(pfn);
}
static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
{
- unsigned long pfn = __bus_to_pfn(addr);
+ unsigned long pfn = __phys_to_pfn(addr);
if (dev && dev->dma_range_map)
pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn)));
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 99035b5891ef44..af612606136ff2 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -346,8 +346,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
#ifndef __virt_to_bus
#define __virt_to_bus __virt_to_phys
#define __bus_to_virt __phys_to_virt
-#define __pfn_to_bus(x) __pfn_to_phys(x)
-#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif
/*
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 0b2fd7e2e9b429..257cb068ac0c5b 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -13,6 +13,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "common.h"
/* cats host-specific stuff */
static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
@@ -56,8 +57,10 @@ static struct hw_pci cats_pci __initdata = {
static int __init cats_pci_init(void)
{
- if (machine_is_cats())
- pci_common_init(&cats_pci);
+ if (!machine_is_cats())
+ return 0;
+ bus_register_notifier(&pci_bus_type, &footbridge_pci_dma_nb);
+ pci_common_init(&cats_pci);
return 0;
}
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eee095f0e2f6c2..dc14d72ca7bb3f 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/device/bus.h>
+#include <linux/dma-mapping.h>
#include <video/vga.h>
#include <asm/page.h>
@@ -219,8 +221,17 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd)
}
}
-#ifdef CONFIG_FOOTBRIDGE_ADDIN
-
+#ifdef CONFIG_FOOTBRIDGE_HOST
+/*
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
+ * would clash with VGA cards.
+ */
+static inline unsigned long fb_bus_sdram_offset(void)
+{
+ return 0xe0000000;
+}
+#elif defined(CONFIG_FOOTBRIDGE_ADDIN)
static inline unsigned long fb_bus_sdram_offset(void)
{
return *CSR_PCISDRAMBASE & 0xfffffff0;
@@ -248,17 +259,24 @@ unsigned long __bus_to_virt(unsigned long res)
return res;
}
EXPORT_SYMBOL(__bus_to_virt);
+#else
+#error "Undefined footbridge mode"
+#endif
-unsigned long __pfn_to_bus(unsigned long pfn)
+static int footbridge_pci_dma_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
{
- return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
-EXPORT_SYMBOL(__pfn_to_bus);
+ struct device *dev = data;
-unsigned long __bus_to_pfn(unsigned long bus)
-{
- return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
+ if (event != BUS_NOTIFY_ADD_DEVICE)
+ return NOTIFY_DONE;
+
+ if (dma_direct_set_offset(dev, PAGE_OFFSET, fb_bus_sdram_offset(),
+ (u64)-1))
+ WARN_ONCE(1, "failed to set DMA offset\n");
+ return NOTIFY_OK;
}
-EXPORT_SYMBOL(__bus_to_pfn);
-#endif
+struct notifier_block footbridge_pci_dma_nb = {
+ .notifier_call = footbridge_pci_dma_notifier,
+};
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index e12587db59c4c8..1773a4183b580c 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -1,4 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/notifier.h>
#include <linux/reboot.h>
extern void footbridge_timer_init(void);
@@ -13,3 +14,5 @@ extern void isa_init_irq(unsigned int irq);
extern void footbridge_restart(enum reboot_mode, const char *);
extern void footbridge_sched_clock(void);
+
+extern struct notifier_block footbridge_pci_dma_nb;
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79b2..80b4f5ace20b35 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -13,6 +13,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "common.h"
static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
@@ -40,8 +41,10 @@ static struct hw_pci ebsa285_pci __initdata = {
static int __init ebsa285_init_pci(void)
{
- if (machine_is_ebsa285())
- pci_common_init(&ebsa285_pci);
+ if (!machine_is_ebsa285())
+ return 0;
+ bus_register_notifier(&pci_bus_type, &footbridge_pci_dma_nb);
+ pci_common_init(&ebsa285_pci);
return 0;
}
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 46fd4a8872b9a3..3a5d2638c18f88 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -26,8 +26,6 @@
#ifndef __ASSEMBLY__
extern unsigned long __virt_to_bus(unsigned long);
extern unsigned long __bus_to_virt(unsigned long);
-extern unsigned long __pfn_to_bus(unsigned long);
-extern unsigned long __bus_to_pfn(unsigned long);
#endif
#define __virt_to_bus __virt_to_bus
#define __bus_to_virt __bus_to_virt
@@ -42,8 +40,6 @@ extern unsigned long __bus_to_pfn(unsigned long);
#define BUS_OFFSET 0xe0000000
#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
-#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
#else
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5f7..68dac9446e7f44 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -13,6 +13,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "common.h"
/*
* We now use the slot ID instead of the device identifiers to select
@@ -54,8 +55,10 @@ static struct hw_pci netwinder_pci __initdata = {
static int __init netwinder_pci_init(void)
{
- if (machine_is_netwinder())
- pci_common_init(&netwinder_pci);
+ if (!machine_is_netwinder())
+ return 0;
+ bus_register_notifier(&pci_bus_type, &footbridge_pci_dma_nb);
+ pci_common_init(&netwinder_pci);
return 0;
}
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
index 4391e433a4b2fc..5d6759e158b9d0 100644
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ b/arch/arm/mach-footbridge/personal-pci.c
@@ -13,6 +13,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "common.h"
static int irqmap_personal_server[] __initdata = {
IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
@@ -50,8 +51,10 @@ static struct hw_pci personal_server_pci __initdata = {
static int __init personal_pci_init(void)
{
- if (machine_is_personal_server())
- pci_common_init(&personal_server_pci);
+ if (!machine_is_personal_server())
+ return 0;
+ bus_register_notifier(&pci_bus_type, &footbridge_pci_dma_nb);
+ pci_common_init(&personal_server_pci);
return 0;
}
--
2.28.0
More information about the linux-arm-kernel
mailing list