[PATCH v3 08/16] irqchip/gic: Configure SGIs as standard interrupts
Marc Zyngier
maz at kernel.org
Thu Sep 17 04:45:56 EDT 2020
On 2020-09-17 08:54, Jon Hunter wrote:
> On 17/09/2020 08:50, Marc Zyngier wrote:
>> Hi Linus,
>>
>> On 2020-09-17 08:40, Linus Walleij wrote:
>>> On Wed, Sep 16, 2020 at 5:11 PM Marc Zyngier <maz at kernel.org> wrote:
>>>
>>>> Can you try the patch below and let me know?
>>>
>>> I tried this patch and now Ux500 WORKS. So this patch is definitely
>>> something you should apply.
>>>
>>>> - if (is_frankengic())
>>>> - set_sgi_intid(irqstat);
>>>> + this_cpu_write(sgi_intid, intid);
>>>
>>> This needs changing to irqstat to compile as pointed out by Jon.
>>>
>>> With that:
>>> Tested-by: Linus Walleij <linus.walleij at linaro.org>
>>
>> Thanks a lot for that.
>>
>> Still need to understand why some of Jon's systems are left
>> unbootable,
>> despite having similar GIC implementations (Tegra194 and Tegra210 use
>> the same GIC-400, and yet only one of the two boots correctly...).
>
> So far, I have only tested this patch on Tegra20. Let me try the other
> failing boards this morning and see if those still fail.
Tegra20 (if I remember well) is a dual A9 with the same GIC
implementation
as Ux500, hence requiring the source CPU bits to be written back. So
this
patch should have cured it, but didn't...
/me puzzled.
M.
--
Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list