[PATCH] ARM: dts: stm32: declare device tree syscon node for TAMP peripheral

[Ahmad Fatoum]

On 9/16/20 4:22 PM, Ahmad Fatoum wrote:
> The stm32mp1 TAMP (Tamper and backup registers) does tamper detection
> and features 32 backup registers that, being in the RTC domain, may
> survive even with Vdd switched off.
> 
> We don't have a driver for the peripheral, but handling it as syscon
> allows using it with existing drivers that work with them, in particular
> a syscon-reboot-mode child node can be defined in board.dts (or fixed up
> by the bootloader) to exchange reboot mode information with the bootloader.
> 

Looking at the title, I see now that there is nothing stm32mp specific in it.
I will rename the patch to
"ARM: dts: stm32: declare syscon node for TAMP peripheral in stm32mp151.dtsi"
when I send out v2.

> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  arch/arm/boot/dts/stm32mp151.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..fa4eb96c95af 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1144,6 +1144,11 @@ syscfg: syscon at 50020000 {
>  			clocks = <&rcc SYSCFG>;
>  		};
>  
> +		tamp: tamp at 5c00a000 {
> +			compatible = "simple-bus", "syscon", "simple-mfd";
> +			reg = <0x5c00a000 0x400>;
> +		};
> +
>  		lptimer2: timer at 50021000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |