[PATCH net-next v5 0/6] net-next: dsa: mt7530: add support for MT7531

[David Miller]

From: Landen Chao <landen.chao at mediatek.com>
Date: Fri, 11 Sep 2020 21:48:50 +0800

> This patch series adds support for MT7531.
> 
> MT7531 is the next generation of MT7530 which could be found on Mediatek
> router platforms such as MT7622 or MT7629.
> 
> It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and
> the same MAC logic of MT7530. Cpu port 6 only supports SGMII interface.
> Cpu port 5 supports either RGMII or SGMII in different HW SKU, but cannot
> be muxed to PHY of port 0/4 like mt7530. Due to support for SGMII
> interface, pll, and pad setting are different from MT7530.
> 
> MT7531 SGMII interface can be configured in following mode:
> - 'SGMII AN mode' with in-band negotiation capability
>     which is compatible with PHY_INTERFACE_MODE_SGMII.
> - 'SGMII force mode' without in-band negotiation
>     which is compatible with 10B/8B encoding of
>     PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
> - 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
>     which is compatible with 10B/8B encoding of
>     PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
 ...

Series applied, thank you.