[PATCH v5 11/14] arm64: usercopy: Check for overlapping buffers in fixup
Oliver Swede
oli.swede at arm.com
Mon Sep 14 11:17:57 EDT 2020
Check for overlapping source and destination buffers in the usercopy
fixup before proceeding, and if this is the case then return from
the fixup with the full copy size in x0.
Imported optimized copy routines may contain the implementation of
both memcpy() and memmov(), where the latter code path is very
different and may result in behaviour that is incompatible with
memcopy in the context of constructing a non-exhaustive fixup
recovery routine. For instance, the current memmov() implementation
copies in reverse.
As this is likely to be an edge case across multiple copy routines
(checked for explicitly from within the routines themselves), and
independent of any specific implementation, it should be suitable
to return the full copy width back to the kernel code path calling
the usercopy function.
Signed-off-by: Oliver Swede <oli.swede at arm.com>
---
arch/arm64/lib/copy_from_user.S | 24 ++++++++--------
arch/arm64/lib/copy_in_user.S | 48 ++++++++++++++++----------------
arch/arm64/lib/copy_to_user.S | 24 ++++++++--------
arch/arm64/lib/copy_user_fixup.S | 36 +++++++++++++++++++-----
4 files changed, 77 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index cd3042e98394..745fbbfc23bb 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -20,7 +20,7 @@
* x0 - bytes not copied
*/
.macro ldrb1 reg, ptr, offset=0
- USER_F(9998f, ldtrb \reg, [\ptr, \offset])
+ USER_F(9996f, ldtrb \reg, [\ptr, \offset])
.endm
.macro strb1 reg, ptr, offset=0
@@ -29,7 +29,7 @@
.macro ldrb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, ldtrb \reg, [\ptr])
+ USER_F(9997f, ldtrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
@@ -38,7 +38,7 @@
.endm
.macro ldr1 reg, ptr, offset=0
- USER_F(9998f, ldtr \reg, [\ptr, \offset])
+ USER_F(9997f, ldtr \reg, [\ptr, \offset])
.endm
.macro str1 reg, ptr, offset=0
@@ -46,8 +46,8 @@
.endm
.macro ldp1 regA, regB, ptr, offset=0
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, ldtr \regA, [\ptr, \offset])
+ USER_F(9997f, ldtr \regB, [\ptr, \offset + 8])
.endm
.macro stp1 regA, regB, ptr, offset=0
@@ -55,8 +55,8 @@
.endm
.macro ldp1_pre regA, regB, ptr, offset
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, ldtr \regA, [\ptr, \offset])
+ USER_F(9997f, ldtr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
@@ -65,7 +65,7 @@
.endm
.macro ldrb1_nuao reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9997f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao reg, ptr, offset=0
@@ -73,7 +73,7 @@
.endm
.macro ldrb1_nuao_reg reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9997f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao_reg reg, ptr, offset=0
@@ -81,7 +81,7 @@
.endm
.macro ldr1_nuao reg, ptr, offset=0
- USER_F(9998f, ldr \reg, [\ptr, \offset])
+ USER_F(9997f, ldr \reg, [\ptr, \offset])
.endm
.macro str1_nuao reg, ptr, offset=0
@@ -89,7 +89,7 @@
.endm
.macro ldp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset])
+ USER_F(9997f, ldp \regA, \regB, [\ptr, \offset])
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
@@ -97,7 +97,7 @@
.endm
.macro ldp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9997f, ldp \regA, \regB, [\ptr, \offset]!)
.endm
.macro stp1_pre_nuao regA, regB, ptr, offset
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
index fe035e513b34..34389d16c338 100644
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -22,93 +22,93 @@
* x0 - bytes not copied
*/
.macro ldrb1 reg, ptr, offset=0
- USER_F(9998f, ldtrb \reg, [\ptr, \offset])
+ USER_F(9997f, ldtrb \reg, [\ptr, \offset])
.endm
.macro strb1 reg, ptr, offset=0
- USER_F(9998f, sttrb \reg, [\ptr, \offset])
+ USER_F(9997f, sttrb \reg, [\ptr, \offset])
.endm
.macro ldrb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, ldtrb \reg, [\ptr])
+ USER_F(9997f, ldtrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
.macro strb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, sttrb \reg, [\ptr])
+ USER_F(9997f, sttrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
.macro ldr1 reg, ptr, offset=0
- USER_F(9998f, ldtr \reg, [\ptr, \offset])
+ USER_F(9997f, ldtr \reg, [\ptr, \offset])
.endm
.macro str1 reg, ptr, offset=0
- USER_F(9998f, sttr \reg, [\ptr, \offset])
+ USER_F(9997f, sttr \reg, [\ptr, \offset])
.endm
.macro ldp1 regA, regB, ptr, offset=0
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, ldtr \regA, [\ptr, \offset])
+ USER_F(9997f, ldtr \regB, [\ptr, \offset + 8])
.endm
.macro stp1 regA, regB, ptr, offset=0
- USER_F(9998f, sttr \regA, [\ptr, \offset])
- USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
.endm
.macro ldp1_pre regA, regB, ptr, offset
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, ldtr \regA, [\ptr, \offset])
+ USER_F(9997f, ldtr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
.macro stp1_pre regA, regB, ptr, offset
- USER_F(9998f, sttr \regA, [\ptr, \offset])
- USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
.macro ldrb1_nuao reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9997f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao reg, ptr, offset=0
- USER_F(9998f, strb \reg, [\ptr, \offset])
+ USER_F(9997f, strb \reg, [\ptr, \offset])
.endm
.macro ldrb1_nuao_reg reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9997f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao_reg reg, ptr, offset=0
- USER_F(9998f, strb \reg, [\ptr, \offset])
+ USER_F(9997f, strb \reg, [\ptr, \offset])
.endm
.macro ldr1_nuao reg, ptr, offset=0
- USER_F(9998f, ldr \reg, [\ptr, \offset])
+ USER_F(9997f, ldr \reg, [\ptr, \offset])
.endm
.macro str1_nuao reg, ptr, offset=0
- USER_F(9998f, str \reg, [\ptr, \offset])
+ USER_F(9997f, str \reg, [\ptr, \offset])
.endm
.macro ldp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset])
+ USER_F(9997f, ldp \regA, \regB, [\ptr, \offset])
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, stp \regA, \regB, [\ptr, \offset])
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset])
.endm
.macro ldp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9997f, ldp \regA, \regB, [\ptr, \offset]!)
.endm
.macro stp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, stp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset]!)
.endm
.macro copy_exit
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index de0af211b3ba..cbb4cdfc7ad3 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -24,7 +24,7 @@
.endm
.macro strb1 reg, ptr, offset=0
- USER_F(9998f, sttrb \reg, [\ptr, \offset])
+ USER_F(9997f, sttrb \reg, [\ptr, \offset])
.endm
.macro ldrb1_reg reg, ptr, offset
@@ -33,7 +33,7 @@
.macro strb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, sttrb \reg, [\ptr])
+ USER_F(9997f, sttrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
@@ -42,7 +42,7 @@
.endm
.macro str1 reg, ptr, offset=0
- USER_F(9998f, sttr \reg, [\ptr, \offset])
+ USER_F(9997f, sttr \reg, [\ptr, \offset])
.endm
.macro ldp1 regA, regB, ptr, offset=0
@@ -50,8 +50,8 @@
.endm
.macro stp1 regA, regB, ptr, offset=0
- USER_F(9998f, sttr \regA, [\ptr, \offset])
- USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
.endm
.macro ldp1_pre regA, regB, ptr, offset
@@ -59,8 +59,8 @@
.endm
.macro stp1_pre regA, regB, ptr, offset
- USER_F(9998f, sttr \regA, [\ptr, \offset])
- USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
@@ -69,7 +69,7 @@
.endm
.macro strb1_nuao reg, ptr, offset=0
- USER_F(9998f, strb \reg, [\ptr, \offset])
+ USER_F(9997f, strb \reg, [\ptr, \offset])
.endm
.macro ldrb1_nuao_reg reg, ptr, offset=0
@@ -77,7 +77,7 @@
.endm
.macro strb1_nuao_reg reg, ptr, offset=0
- strb \reg, [\ptr, \offset]
+ USER_F(9997f, strb \reg, [\ptr, \offset])
.endm
.macro ldr1_nuao reg, ptr, offset=0
@@ -85,7 +85,7 @@
.endm
.macro str1_nuao reg, ptr, offset=0
- USER_F(9998f, str \reg, [\ptr, \offset])
+ USER_F(9997f, str \reg, [\ptr, \offset])
.endm
.macro ldp1_nuao regA, regB, ptr, offset=0
@@ -97,11 +97,11 @@
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, stp \regA, \regB, [\ptr, \offset])
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset])
.endm
.macro stp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, stp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset]!)
.endm
.macro copy_exit
diff --git a/arch/arm64/lib/copy_user_fixup.S b/arch/arm64/lib/copy_user_fixup.S
index a528b7d7d1bd..01e5c34461d7 100644
--- a/arch/arm64/lib/copy_user_fixup.S
+++ b/arch/arm64/lib/copy_user_fixup.S
@@ -3,13 +3,35 @@
addr .req x15
.section .fixup,"ax"
.align 2
+9997:
+ ldp x0, x1, [sp], #16 // x0 (dst), x1 (src)
+ ldr x2, [sp], #16 // x2 (count)
+ add x3, x0, x2 // x3: dstend
+ add x4, x1, x2 // x4: srcend
+ /*
+ * Overlapping buffers:
+ * (src <= dst && dst < srcend)
+ * || (dst <= src && src < dstend)
+ */
+ cmp x1, x0 // src (x1), dst (x0)
+ ccmp x0, x4, #0, le // dst (x0), srcend (x4)
+ b.lt L(none_copied)
+ cmp x0, x1 // dst (x0), src (x1)
+ ccmp x1, x3, #0, le // src (x1), dstend (x3)
+ b.lt L(none_copied)
+ /*
+ * Direct to subroutine based on location of fault
+ */
+ cmp addr, x1 // addr (x15), src (x1)
+ ccmp addr, x4, #0x0, ge // addr, x4, #0, ge
+ b.lt L(src_fault)
+ b L(dst_fault)
+
+L(src_fault):
+L(dst_fault):
+
9998:
- // If it falls in the src range then it was a load that failed,
- // otherwise it was a store
- cmp addr, src
- ccmp addr, srcend, #0x0, ge
- csel x0, srcend, dstend, lt
- sub x0, x0, addr
- add sp, sp, 32
+L(none_copied):
+ mov x0, x2 // count (x2)
ret
--
2.17.1
More information about the linux-arm-kernel
mailing list