[PATCH 00/15] selftests/seccomp: Refactor change_syscall()
Michael Ellerman
mpe at ellerman.id.au
Mon Sep 14 08:15:18 EDT 2020
Kees Cook <keescook at chromium.org> writes:
> Hi,
>
> This refactors the seccomp selftest macros used in change_syscall(),
> in an effort to remove special cases for mips, arm, arm64, and xtensa,
> which paves the way for powerpc fixes.
>
> I'm not entirely done testing, but all-arch build tests and x86_64
> selftests pass. I'll be doing arm, arm64, and i386 selftests shortly,
> but I currently don't have an easy way to check xtensa, mips, nor
> powerpc. Any help there would be appreciated!
The series builds fine for me, and all the tests pass (see below).
Thanks for picking up those changes to deal with powerpc being oddball.
Tested-by: Michael Ellerman <mpe at ellerman.id.au> (powerpc)
cheers
./seccomp_bpf
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
# OK global.user_notification_continue
ok 45 global.user_notification_continue
# RUN global.user_notification_filter_empty ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
# OK global.user_notification_continue
ok 45 global.user_notification_continue
# RUN global.user_notification_filter_empty ...
# OK global.user_notification_filter_empty
ok 46 global.user_notification_filter_empty
# RUN global.user_notification_filter_empty_threaded ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
# OK global.user_notification_continue
ok 45 global.user_notification_continue
# RUN global.user_notification_filter_empty ...
# OK global.user_notification_filter_empty
ok 46 global.user_notification_filter_empty
# RUN global.user_notification_filter_empty_threaded ...
# OK global.user_notification_filter_empty_threaded
ok 47 global.user_notification_filter_empty_threaded
# RUN global.user_notification_addfd ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
# OK global.user_notification_continue
ok 45 global.user_notification_continue
# RUN global.user_notification_filter_empty ...
# OK global.user_notification_filter_empty
ok 46 global.user_notification_filter_empty
# RUN global.user_notification_filter_empty_threaded ...
# OK global.user_notification_filter_empty_threaded
ok 47 global.user_notification_filter_empty_threaded
# RUN global.user_notification_addfd ...
# OK global.user_notification_addfd
ok 48 global.user_notification_addfd
# RUN global.user_notification_addfd_rlimit ...
TAP version 13
1..86
# Starting 86 tests from 7 test cases.
# RUN global.kcmp ...
# OK global.kcmp
ok 1 global.kcmp
# RUN global.mode_strict_support ...
# OK global.mode_strict_support
ok 2 global.mode_strict_support
# RUN global.mode_strict_cannot_call_prctl ...
# OK global.mode_strict_cannot_call_prctl
ok 3 global.mode_strict_cannot_call_prctl
# RUN global.no_new_privs_support ...
# OK global.no_new_privs_support
ok 4 global.no_new_privs_support
# RUN global.mode_filter_support ...
# OK global.mode_filter_support
ok 5 global.mode_filter_support
# RUN global.mode_filter_without_nnp ...
# OK global.mode_filter_without_nnp
ok 6 global.mode_filter_without_nnp
# RUN global.filter_size_limits ...
# OK global.filter_size_limits
ok 7 global.filter_size_limits
# RUN global.filter_chain_limits ...
# OK global.filter_chain_limits
ok 8 global.filter_chain_limits
# RUN global.mode_filter_cannot_move_to_strict ...
# OK global.mode_filter_cannot_move_to_strict
ok 9 global.mode_filter_cannot_move_to_strict
# RUN global.mode_filter_get_seccomp ...
# OK global.mode_filter_get_seccomp
ok 10 global.mode_filter_get_seccomp
# RUN global.ALLOW_all ...
# OK global.ALLOW_all
ok 11 global.ALLOW_all
# RUN global.empty_prog ...
# OK global.empty_prog
ok 12 global.empty_prog
# RUN global.log_all ...
# OK global.log_all
ok 13 global.log_all
# RUN global.unknown_ret_is_kill_inside ...
# OK global.unknown_ret_is_kill_inside
ok 14 global.unknown_ret_is_kill_inside
# RUN global.unknown_ret_is_kill_above_allow ...
# OK global.unknown_ret_is_kill_above_allow
ok 15 global.unknown_ret_is_kill_above_allow
# RUN global.KILL_all ...
# OK global.KILL_all
ok 16 global.KILL_all
# RUN global.KILL_one ...
# OK global.KILL_one
ok 17 global.KILL_one
# RUN global.KILL_one_arg_one ...
# OK global.KILL_one_arg_one
ok 18 global.KILL_one_arg_one
# RUN global.KILL_one_arg_six ...
# OK global.KILL_one_arg_six
ok 19 global.KILL_one_arg_six
# RUN global.KILL_thread ...
# OK global.KILL_thread
ok 20 global.KILL_thread
# RUN global.KILL_process ...
# OK global.KILL_process
ok 21 global.KILL_process
# RUN global.arg_out_of_range ...
# OK global.arg_out_of_range
ok 22 global.arg_out_of_range
# RUN global.ERRNO_valid ...
# OK global.ERRNO_valid
ok 23 global.ERRNO_valid
# RUN global.ERRNO_zero ...
# OK global.ERRNO_zero
ok 24 global.ERRNO_zero
# RUN global.ERRNO_capped ...
# OK global.ERRNO_capped
ok 25 global.ERRNO_capped
# RUN global.ERRNO_order ...
# OK global.ERRNO_order
ok 26 global.ERRNO_order
# RUN global.negative_ENOSYS ...
# OK global.negative_ENOSYS
ok 27 global.negative_ENOSYS
# RUN global.seccomp_syscall ...
# OK global.seccomp_syscall
ok 28 global.seccomp_syscall
# RUN global.seccomp_syscall_mode_lock ...
# OK global.seccomp_syscall_mode_lock
ok 29 global.seccomp_syscall_mode_lock
# RUN global.detect_seccomp_filter_flags ...
# OK global.detect_seccomp_filter_flags
ok 30 global.detect_seccomp_filter_flags
# RUN global.TSYNC_first ...
# OK global.TSYNC_first
ok 31 global.TSYNC_first
# RUN global.syscall_restart ...
# OK global.syscall_restart
ok 32 global.syscall_restart
# RUN global.filter_flag_log ...
# OK global.filter_flag_log
ok 33 global.filter_flag_log
# RUN global.get_action_avail ...
# OK global.get_action_avail
ok 34 global.get_action_avail
# RUN global.get_metadata ...
# OK global.get_metadata
ok 35 global.get_metadata
# RUN global.user_notification_basic ...
# OK global.user_notification_basic
ok 36 global.user_notification_basic
# RUN global.user_notification_with_tsync ...
# OK global.user_notification_with_tsync
ok 37 global.user_notification_with_tsync
# RUN global.user_notification_kill_in_middle ...
# OK global.user_notification_kill_in_middle
ok 38 global.user_notification_kill_in_middle
# RUN global.user_notification_signal ...
# OK global.user_notification_signal
ok 39 global.user_notification_signal
# RUN global.user_notification_closed_listener ...
# OK global.user_notification_closed_listener
ok 40 global.user_notification_closed_listener
# RUN global.user_notification_child_pid_ns ...
# OK global.user_notification_child_pid_ns
ok 41 global.user_notification_child_pid_ns
# RUN global.user_notification_sibling_pid_ns ...
# OK global.user_notification_sibling_pid_ns
ok 42 global.user_notification_sibling_pid_ns
# RUN global.user_notification_fault_recv ...
# OK global.user_notification_fault_recv
ok 43 global.user_notification_fault_recv
# RUN global.seccomp_get_notif_sizes ...
# OK global.seccomp_get_notif_sizes
ok 44 global.seccomp_get_notif_sizes
# RUN global.user_notification_continue ...
# OK global.user_notification_continue
ok 45 global.user_notification_continue
# RUN global.user_notification_filter_empty ...
# OK global.user_notification_filter_empty
ok 46 global.user_notification_filter_empty
# RUN global.user_notification_filter_empty_threaded ...
# OK global.user_notification_filter_empty_threaded
ok 47 global.user_notification_filter_empty_threaded
# RUN global.user_notification_addfd ...
# OK global.user_notification_addfd
ok 48 global.user_notification_addfd
# RUN global.user_notification_addfd_rlimit ...
# OK global.user_notification_addfd_rlimit
ok 49 global.user_notification_addfd_rlimit
# RUN TRAP.dfl ...
# OK TRAP.dfl
ok 50 TRAP.dfl
# RUN TRAP.ign ...
# OK TRAP.ign
ok 51 TRAP.ign
# RUN TRAP.handler ...
# OK TRAP.handler
ok 52 TRAP.handler
# RUN precedence.allow_ok ...
# OK precedence.allow_ok
ok 53 precedence.allow_ok
# RUN precedence.kill_is_highest ...
# OK precedence.kill_is_highest
ok 54 precedence.kill_is_highest
# RUN precedence.kill_is_highest_in_any_order ...
# OK precedence.kill_is_highest_in_any_order
ok 55 precedence.kill_is_highest_in_any_order
# RUN precedence.trap_is_second ...
# OK precedence.trap_is_second
ok 56 precedence.trap_is_second
# RUN precedence.trap_is_second_in_any_order ...
# OK precedence.trap_is_second_in_any_order
ok 57 precedence.trap_is_second_in_any_order
# RUN precedence.errno_is_third ...
# OK precedence.errno_is_third
ok 58 precedence.errno_is_third
# RUN precedence.errno_is_third_in_any_order ...
# OK precedence.errno_is_third_in_any_order
ok 59 precedence.errno_is_third_in_any_order
# RUN precedence.trace_is_fourth ...
# OK precedence.trace_is_fourth
ok 60 precedence.trace_is_fourth
# RUN precedence.trace_is_fourth_in_any_order ...
# OK precedence.trace_is_fourth_in_any_order
ok 61 precedence.trace_is_fourth_in_any_order
# RUN precedence.log_is_fifth ...
# OK precedence.log_is_fifth
ok 62 precedence.log_is_fifth
# RUN precedence.log_is_fifth_in_any_order ...
# OK precedence.log_is_fifth_in_any_order
ok 63 precedence.log_is_fifth_in_any_order
# RUN TRACE_poke.read_has_side_effects ...
# OK TRACE_poke.read_has_side_effects
ok 64 TRACE_poke.read_has_side_effects
# RUN TRACE_poke.getpid_runs_normally ...
# OK TRACE_poke.getpid_runs_normally
ok 65 TRACE_poke.getpid_runs_normally
# RUN TRACE_syscall.ptrace.negative_ENOSYS ...
# OK TRACE_syscall.ptrace.negative_ENOSYS
ok 66 TRACE_syscall.ptrace.negative_ENOSYS
# RUN TRACE_syscall.ptrace.syscall_allowed ...
# OK TRACE_syscall.ptrace.syscall_allowed
ok 67 TRACE_syscall.ptrace.syscall_allowed
# RUN TRACE_syscall.ptrace.syscall_redirected ...
# OK TRACE_syscall.ptrace.syscall_redirected
ok 68 TRACE_syscall.ptrace.syscall_redirected
# RUN TRACE_syscall.ptrace.syscall_errno ...
# OK TRACE_syscall.ptrace.syscall_errno
ok 69 TRACE_syscall.ptrace.syscall_errno
# RUN TRACE_syscall.ptrace.syscall_faked ...
# OK TRACE_syscall.ptrace.syscall_faked
ok 70 TRACE_syscall.ptrace.syscall_faked
# RUN TRACE_syscall.ptrace.skip_after ...
# OK TRACE_syscall.ptrace.skip_after
ok 71 TRACE_syscall.ptrace.skip_after
# RUN TRACE_syscall.ptrace.kill_after ...
# OK TRACE_syscall.ptrace.kill_after
ok 72 TRACE_syscall.ptrace.kill_after
# RUN TRACE_syscall.seccomp.negative_ENOSYS ...
# OK TRACE_syscall.seccomp.negative_ENOSYS
ok 73 TRACE_syscall.seccomp.negative_ENOSYS
# RUN TRACE_syscall.seccomp.syscall_allowed ...
# OK TRACE_syscall.seccomp.syscall_allowed
ok 74 TRACE_syscall.seccomp.syscall_allowed
# RUN TRACE_syscall.seccomp.syscall_redirected ...
# OK TRACE_syscall.seccomp.syscall_redirected
ok 75 TRACE_syscall.seccomp.syscall_redirected
# RUN TRACE_syscall.seccomp.syscall_errno ...
# OK TRACE_syscall.seccomp.syscall_errno
ok 76 TRACE_syscall.seccomp.syscall_errno
# RUN TRACE_syscall.seccomp.syscall_faked ...
# OK TRACE_syscall.seccomp.syscall_faked
ok 77 TRACE_syscall.seccomp.syscall_faked
# RUN TRACE_syscall.seccomp.skip_after ...
# OK TRACE_syscall.seccomp.skip_after
ok 78 TRACE_syscall.seccomp.skip_after
# RUN TRACE_syscall.seccomp.kill_after ...
# OK TRACE_syscall.seccomp.kill_after
ok 79 TRACE_syscall.seccomp.kill_after
# RUN TSYNC.siblings_fail_prctl ...
# OK TSYNC.siblings_fail_prctl
ok 80 TSYNC.siblings_fail_prctl
# RUN TSYNC.two_siblings_with_ancestor ...
# OK TSYNC.two_siblings_with_ancestor
ok 81 TSYNC.two_siblings_with_ancestor
# RUN TSYNC.two_sibling_want_nnp ...
# OK TSYNC.two_sibling_want_nnp
ok 82 TSYNC.two_sibling_want_nnp
# RUN TSYNC.two_siblings_with_no_filter ...
# OK TSYNC.two_siblings_with_no_filter
ok 83 TSYNC.two_siblings_with_no_filter
# RUN TSYNC.two_siblings_with_one_divergence ...
# OK TSYNC.two_siblings_with_one_divergence
ok 84 TSYNC.two_siblings_with_one_divergence
# RUN TSYNC.two_siblings_with_one_divergence_no_tid_in_err ...
# OK TSYNC.two_siblings_with_one_divergence_no_tid_in_err
ok 85 TSYNC.two_siblings_with_one_divergence_no_tid_in_err
# RUN TSYNC.two_siblings_not_under_filter ...
# OK TSYNC.two_siblings_not_under_filter
ok 86 TSYNC.two_siblings_not_under_filter
# PASSED: 86 / 86 tests passed.
# Totals: pass:86 fail:0 xfail:0 xpass:0 skip:0 error:0
More information about the linux-arm-kernel
mailing list