[PATCH 2/2] arm64: dts: lx2160a: add device tree for lx2162aqds board

[Shawn Guo]

On Wed, Sep 09, 2020 at 07:10:12AM +0000, Meenakshi Aggarwal wrote:
> > > +	sb_3v3: regulator-sb3v3 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "MC34717-3.3VSB";
> > > +		regulator-min-microvolt = <3300000>;
> > > +		regulator-max-microvolt = <3300000>;
> > > +		regulator-boot-on;
> > > +		regulator-always-on;
> > 
> > I do not see any point to have regulator-boot-on or regulator-always-on for a
> > regulator that doesn't have on/off control.
> [Meenakshi Aggarwal] Properties are added to specify that platform firmware's out of reset configuration enabled the regulator and 
> regulator should never be disabled or change its operative status.

What I was wondering if how this regulator is enabled by firmware, by
some GPIO control?  In that case, 'gpio' property should be there to
describe the GPIO control.

> 
> Can you help in understanding why these optional properties cannot be used together

It's totally fine to use these properties together.  But if the
regulator doesn't have on/off control, neither of them makes sense.

Shawn