[GIT PULL 1/5] Broadcom devicetree changes for 5.10
Florian Fainelli
f.fainelli at gmail.com
Fri Sep 11 23:21:48 EDT 2020
The following changes since commit 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5:
Linux 5.9-rc1 (2020-08-16 13:04:57 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.10/devicetree
for you to fetch changes up to 1a4a752ee876b7c7d775d73c51decdbf852ba4d5:
Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/next (2020-09-10 13:35:55 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:
- Christian adds support for the Cisco Meraki MR32 which is based on the
BCM53016 SoC, this requires specifying the PWM, second UART and third
PCIe controller in Device Tree before finally adding support for the
board.
- Adrian updates the status properties from "ok" to "okay".
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for both the Cygnus and Northstar Plus (NSP). He does the
same thing with the SP804 timer node which was missing an
"arm,primecell" compatible string.
- Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all
DRM changes are ready.
----------------------------------------------------------------
Adrian Schmutzler (1):
ARM: dts: NSP: replace status value "ok" by "okay"
Andre Przywara (3):
ARM: dts: Cygnus: Fix SP805 clocks
ARM: dts: NSP: Fix SP805 clock-names
ARM: dts: broadcom: Fix SP804 node
Christian Lamparter (5):
dt-bindings: ARM: add bindings for the Meraki MR32
ARM: dts: BCM5301X: Specify PWM in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify pcie2 in the DT
ARM: BCM5301X: Add DT for Meraki MR32
Florian Fainelli (1):
Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/next
Maxime Ripard (1):
ARM: dts: bcm2711: Enable the display pipeline
.../devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm-cygnus.dtsi | 4 +-
arch/arm/boot/dts/bcm-nsp.dtsi | 6 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 48 +++++
arch/arm/boot/dts/bcm2711.dtsi | 122 ++++++++++++-
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 197 +++++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 25 ++-
arch/arm/boot/dts/bcm958525xmc.dts | 2 +-
arch/arm/boot/dts/bcm958625k.dts | 2 +-
10 files changed, 399 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm53016-meraki-mr32.dts
More information about the linux-arm-kernel
mailing list