[PATCH v3 1/2] leds: mt6360: Add LED driver for MT6360

[Jacek Anaszewski]

Hi Pavel,

On 9/11/20 9:05 AM, Pavel Machek wrote:
> Hi!
> 
>>> +{
>>> +	struct mt6360_led *led = container_of(lcdev, struct mt6360_led, flash.led_cdev);
>>> +	struct mt6360_priv *priv = led->priv;
>>> +	u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
>>> +	u32 val = (level) ? MT6360_FLCSEN_MASK(led->led_no) : 0;
>>> +	u32 prev = priv->fled_torch_used, curr;
>>> +	int ret;
>>> +
>>> +	dev_dbg(lcdev->dev, "[%d] brightness %d\n", led->led_no, level);
>>> +	if (priv->fled_strobe_used) {
>>> +		dev_warn(lcdev->dev, "Please disable strobe first [%d]\n", priv->fled_strobe_used);
>>
>> Doesn't hardware handle that? IOW, what happens when you have enabled
>> both torch and flash? If flash just overrides torch mode, than you
>> should not prevent enabling torch in this case.
> 
> Yep, this is strange/confusing... and was reason why I asked for not
> supporting strobe from sysfs.

What you say now is even more confusing when we look at your ack
under this patch:

commit 7aea8389a77abf9fde254aca2434a605c7704f58
Author: Jacek Anaszewski <j.anaszewski at samsung.com>
Date:   Fri Jan 9 07:22:51 2015 -0800

     leds: Add LED Flash class extension to the LED subsystem

     Some LED devices support two operation modes - torch and flash.
     This patch provides support for flash LED devices in the LED subsystem
     by introducing new sysfs attributes and kernel internal interface.
     The attributes being introduced are: flash_brightness, flash_strobe,
     flash_timeout, max_flash_timeout, max_flash_brightness, flash_fault,
     flash_sync_strobe and available_sync_leds. All the flash related
     features are placed in a separate module.

     The modifications aim to be compatible with V4L2 framework requirements
     related to the flash devices management. The design assumes that V4L2
     sub-device can take of the LED class device control and communicate
     with it through the kernel internal interface. When V4L2 Flash 
sub-device
     file is opened, the LED class device sysfs interface is made
     unavailable.

     Signed-off-by: Jacek Anaszewski <j.anaszewski at samsung.com>
     Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
     Cc: Richard Purdie <rpurdie at rpsys.net>
     Acked-by: Pavel Machek <pavel at ucw.cz>
     Signed-off-by: Bryan Wu <cooloney at gmail.com>


> Could I get you to remove code you are not commenting at when
> reviewing?
> 
>>> +MODULE_AUTHOR("Gene Chen <gene_chen at richtek.com>");
>>> +MODULE_DESCRIPTION("MT6360 Led Driver");
> 
> Led -> LED.
> 
> 									Pavel
> 

-- 
Best regards,
Jacek Anaszewski