[PATCH v3 0/5] arm64: Initial support for Texas Instrument's J7200 Platform

[Nishanth Menon]

On 21:52-20200908, Lokesh Vutla wrote:
> This series adds initial support for latest new SoC, J7200, from Texas Instruments.
> 
> The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
> It is targeted for for automotive gateway, vehicle compute systems,
> Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
> The SoC aims to meet the complex processing needs of modern embedded products.
> 
> See J7200 Technical Reference Manual (SPRUIU1, June 2020)
> for further details: https://www.ti.com/lit/pdf/spruiu1
> 
> This series is based on the ti-k3-dts-next from Nishanth's tree[0].
> Boot log: https://pastebin.ubuntu.com/p/Ppng92TR9z/

Thanks a bunch. Will also appreciate a test against linux-next tag
> 
> Changes since v2:
> - Update Makefile to build dtbs using CONFIG_ARCH_K3
> - use 0x00 in all places just to be consistent for all K3 devices
> - Fixed upper case to lower case in reg property.
> 
> [0] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
> 
> Lokesh Vutla (5):
>   arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs
>   dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
>   dt-bindings: arm: ti: Add bindings for J7200 SoC
>   arm64: dts: ti: Add support for J7200 SoC
>   arm64: dts: ti: Add support for J7200 Common Processor Board
> 

Thanks for updating the comments and for your patience.. if you
could address the last batch of comments (sorry for missing them
out in the last review), I think we might be all set..

pending review-by from Rob.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D