[RFT 07/25] ARM: dts: s5pv210: move PMU node out of clock controller

[Jonathan Bakker]

Works for me on the Galaxy S.

Tested-by: Jonathan Bakker <xc-racer2 at live.ca>

Thanks,
Jonathan

On 2020-09-07 9:11 a.m., Krzysztof Kozlowski wrote:
> The Power Management Unit (PMU) is a separate device which has little
> common with clock controller.  Moving it to one level up (from clock
> controller child to SoC) allows to remove fake simple-bus compatible and
> dtbs_check warnings like:
> 
>   clock-controller at e0100000: $nodename:0:
>     'clock-controller at e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
>  arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
>  1 file changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
> index 5c760a6d7955..46221a5c8ce5 100644
> --- a/arch/arm/boot/dts/s5pv210.dtsi
> +++ b/arch/arm/boot/dts/s5pv210.dtsi
> @@ -92,19 +92,16 @@
>  		};
>  
>  		clocks: clock-controller at e0100000 {
> -			compatible = "samsung,s5pv210-clock", "simple-bus";
> +			compatible = "samsung,s5pv210-clock";
>  			reg = <0xe0100000 0x10000>;
>  			clock-names = "xxti", "xusbxti";
>  			clocks = <&xxti>, <&xusbxti>;
>  			#clock-cells = <1>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges;
> +		};
>  
> -			pmu_syscon: syscon at e0108000 {
> -				compatible = "samsung-s5pv210-pmu", "syscon";
> -				reg = <0xe0108000 0x8000>;
> -			};
> +		pmu_syscon: syscon at e0108000 {
> +			compatible = "samsung-s5pv210-pmu", "syscon";
> +			reg = <0xe0108000 0x8000>;
>  		};
>  
>  		pinctrl0: pinctrl at e0200000 {
>