[PATCH 11/11] ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
Krzysztof Kozlowski
krzk at kernel.org
Mon Sep 7 14:33:13 EDT 2020
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: xti at 0:reg:0: [0] is too short
clocks: 'ranges' is a required property
xti at 0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 811bfdef4e9b..47626ede6fdd 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -17,18 +17,11 @@
reg = <0x30000000 0x4000000>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xti: xti at 0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "xti";
- #clock-cells = <0>;
- };
+ xti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
};
};
--
2.17.1
More information about the linux-arm-kernel
mailing list